Dell 5230dn Mono Laser Printer Service Manual page 147

Error
code or Error contents
message
982.04 Output option
communication
failure.
982.06 Paperport failure
982.07 Too many options
installed
982.11 Paperport failure
982.12 Paperport failure
982.13 Hot plug failure
983.00 Communication
failure
984.00 Communication
failure
Description/Action
An output option was not fully
seated onto the printer or has
been removed while the main
power is turned on.
Paper port priortizer error.
Option device message was
not read by the priortizer.
Exceeded the maximum
number of input or output
options.
Command response error on
the paper port. Response is too
large for the communications
buffer.
Bad bottom trunk on the paper
port.
The printer has detected a hot
plug of an optional device.
Low-level error on paper port.
Invalid command received by
the paper port device.
Invalid command parameter
received by the paper port
device.
Possible repair actions
1. Turn the main power off.
2. Remove and reinstall the
output option.
3. Turn the main power back
on.
4. Check all output option
interface connections if
problem remains.
Replace the system card
assembly.
Go to "System card
assembly removal" on
page 4-76.
Remove the appropriate input
or output options.
Replace the system card
assembly.
Go to "System card
assembly removal" on
page 4-76.
Replace the system card
assembly.
"System card
Go to
assembly removal" on
page 4-76.
Power the machine off/on after
all options are installed.
Replace the system card
assembly.
Go to "System card
assembly removal" on
page 4-76.
Replace the system card
assembly.
Go to "System card
assembly removal" on
page 4-76.
Diagnostic information
2-113