Regi Jam (Exit Sensor On Jam) - Dell C2660dn User Manual

Action
2d Ensure that the envelope is properly loaded in the MPF as instructed in The task is complete.
"Loading an Envelope in the MPF."
Does this solve your problem?
2e
Is the print media damp?
3a Fan the print media.
Does this solve your problem?
3b
Wipe the retard roller in the MPF with a cloth moistened with water.
Does this solve your problem?
3c If the envelope is deformed, correct it or use another envelope.
Does this solve your problem?
3d
Turn over the print media.
Does this solve your problem?
4a Use print media that is not damp.
Does this solve your problem?
4b
Replace the drum cartridges.
Does this solve your problem?

Regi Jam (Exit Sensor On JAM)

Action
1
Ensure that the drum cartridges are installed correctly.
Does this solve your problem?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
3 Ensure that the fusing unit is set properly.
Does this solve your problem?
4
Replace the fusing unit.
Replace the fusing unit. See "Removing the Fusing Unit."
a
After you replace the fusing unit, click Chart Print on the Diagnosis
b
tab.
Click Pitch Configuration Chart.
c
The Pitch Configuration Chart is printed.
Does this solve your problem?
5 Ensure that the transfer belt unit is installed correctly.
Does this solve your problem?
Yes No
Go to action 3c.
Go to action 3d. Go to action 3a.
The task is complete. Go to action 3b.
The task is complete. Go to action 4b.
The task is complete. Go to action 3a.
The task is complete. Go to action 4a.
The task is complete. Go to action 3a.
The task is complete. Contact Dell.
Yes No
The task is complete. Go to action 2.
The task is complete. Go to action 3.
The task is complete. Go to action 4.
The task is complete. Go to action 5.
The task is complete. Go to action 6.
Troubleshooting Guide
341