AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual page 81

Structure
Data backup
Buzzer
Supply voltage
Power consumption
Fuse
Operating temperature
& humidity
Storage temperature &
humidity
Weight (accessories not
included)
Dimensions
RS-422/485 OP-03
RS-232C OP-04
Analog
OP-07
output
OP-10
OP-11
Conduit
OP-12
fittings
OP-13
OP-14
Stand OP-20
•
Hexagonal wrench to open/close the case X 1
•
Hexagonal wrench to affix cables to conduit fittings X 1
•
Instruction manual (this book) X 1
General specifications
•
Anti explosion structure
•
Type: ExD BT5 (Inspection qualified number: "C13526"
•
Zero point correction value, tare value, set point, accumulated weight
backup by a lithium battery (Approx. 10 years)
•
An alarm indicator lamp is turned on when the battery is running out.
•
Calibration data, and each function data stored into the non-volatile
memory (EEPROM). (Up to 10,000 times)
Approximately 90dB at a place 1 meter away.
100 VAC +10%-15%, 50Hz 60Hz
60 VA
1A, time-lag type fuse
-5 to +40°C, 45 to 85%RH (non-condensing)
-15 to 70°C, 45 ~ 85%RH (non-condensing)
Approximately 26kg
300(W) X 380(H) X 199(D) mm See {Dimensions} in detail
Options
Either OP-03 or OP-04 can be installed. Not both in one unit.
Type Fitting cable diameter
HPN21(R 8) up to 8 mm beyond 6 mm
HPN21(R10) up to 10 mm beyond 8 mm
HPN21(R12) up to 12 mm beyond 10 mm
HPN22(R14) up to 14 mm beyond 12 mm
HPN22(R16) up to 16 mm beyond 14 mm
Accessories
A-3
Fitting connector diameter
G 1/2 (PF 1/2)
G 3/4 (PF 3/4)