Calf-14="4" Weighing Mode - AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual

6-7 CALF-14="4" Weighing Mode

(Loss-In-weigh in built-in automatic program mode)
Output signal
Zero band
Full
Full-flow
Medium-flow
Dribble-flow
Over limit
Under limit
• When an output condition is established, full flow, medium flow, and dribble flow outputs are turned off, but the other
outputs are turned on.
• Once the full flow, medium flow, and dribble flow are turned off, they are not turned on until the next start of batching.
• Over limit / Under limit is activated based on the net weight upon batch finish. (May be changed to customer
programmed control mode operation)
• The zero band is a customer programmed control mode operation.
Weighing process
Sequence #
1
2
3
4
5
6
7
8
Full
Final - Optional preliminary
Final - Preliminary
Final - Free fall
Final + Over limit
• The "Zero band" is output.
• Ingredient continues to be supplied until the "Full" signal is output.
• The "Tare" signal is input at stable display.
• The "Batch start" signal is input.
• The "Batch start wait timer" starts.
• The "Batch start wait timer" completes the set time
• "Full-flow", "Medium-flow" and "Dribble-flow" output signals are turned on.
• The "Full-flow comparator inhibitor timer" and "Batch monitoring timer" start.
• Net weight reaches the weight of "Final" –"Optional preliminary".
• The "Full-flow" output is turned off.
• The "Medium-flow comparator inhibitor timer" starts.
• Net weight reaches the weight of "Final" –"Preliminary" or more.
• The "Medium-flow" signal is turned off.
• The "Dribble-flow comparator inhibitor timer" starts.
• Net weight reaches the weight of "Final" –"Free fall" or more.
• The "Dribble-flow" signal is turned off.
• The "Judgment wait timer" starts.
• The "Judgment wait timer" completes the set time.
• Display becomes stable.
• If automatic free fall compensation is being used, its calculation will be made.
• The "Batch Finish" output signal is turned on
• If there is excess or shortage, a judgment result output signal (Over limit or
Under limit) will be turned on. ("Within limit" is on in the chart on next page.)
• The "Batch monitoring timer" is reset.
• The net weight is accumulated automatically.
• The data is output from the interface set for auto print.
Output condition
Gross weight
≤
Gross weight
≤
Net weight
≤
Net weight
≤
Net weight
< Net weight
Net weight
Process
6-12
≤ Zero band
< Final - Under limit
.