Table of Contents
Advertisement
Type B for the check-weighing mode.
#
Name
[1]
[ZERO]
[7]
[2]
[ANF]
[3]
[TARE]
[8]
[4]
[CALF]
[5]
[GROSS/NET]
[9]
[6]
[PRESET
TARE]
[7]
[ON/OFF]
[8]
[SET POINT]
[9]
[FUNC.]
[6]
[ZERO BAND]
[10]
[RSF]
Returns the display to the center of zero. The range of zero can be set at
CALF-05. See { Appendix C: Function List}
Works as a numerical key, 7, used for settings.
Enters the analog output (OP-07) mode.
See {8-4 Option-07:Analog Output}
Subtracts the tare. When gross weight is "0", it clears tare.
The tare subtraction condition can be set with CALF-10 and 11.
See {Appendix C: Function List}
Works as a numerical key, 8, used for settings.
Enters the calibration mode. See {4. Calibration}
Switches the display between "gross" and "net" weight.
Works as a numerical key, 9, used for settings.
Selects the "preset tare" weight.
• Turns ON and OFF the display in the normal mode.
• In the OFF mode, display and external I/Os are all off with the "O" mark on
the display.
• Available during operation.
(Press the key more than 0.3 seconds to activate.)
Selects a set point of the code input by numerical keys.
Enters the function setting mode. See {5-2. Function Settings}.
(Press the key more than 0.3 seconds to activate.)
Works as a numerical key, 6, used for settings.
Selects the "zero band" weight.
Enters the setting mode for the OP-03: RS-422/485, OP-04: RS-232C.
See {8-3 OP-03:RS-422/485, OP-04:RS-232C})
Description
1-6
Advertisement
Table of Contents
