Table of Contents
Advertisement
#
Name
[11]
[ENTER]
[12]
[F]
[13]
[ESC]
[3]
[Go]
[14]
[INF]
[15]
[+/-]
[2]
[Hi]
[16]
[SQF]
[0]
[17]
[CODE]
[1]
[18]
[Hi-Hi]
[FNCF]
[5]
[19]
[Lo-Lo]
[SIF]
[4]
[Lo]
[20]
[OUTF]
Writes a value into memory or ends the setting.
Selects an item.
See FncF-02 {Appendix C: Function List}.
• Returns to the previous status.
• Escapes from the current operation.
• Mutes the sound of the buzzer.
Works as a numerical key, 3, used for settings.
Selects the "Go" weight in the check weighing mode.
Enters the setting mode for the control input.
See {Appendix C: Function List}.
Sets a polarity + (blank) or -.
Returns the setting to the previous.
Sets a blank in the data.
Works as a numerical key, 2, used for settings.
Selects the "Hi limit" weight in the check-weighing mode.
Enters the weighing sequence function mode.
See {Appendix C: Function List}.
Works as a numerical key, 0, used for settings.
• Selects a code number.
• Calls a set point of the code input by numerical keys.
• Edits (call/ retrieve/copy/erase) a set point by code.
• Selects set points of the code.
• Sets and changes a set point of the code input by numerical keys.
Works as a numerical key, 1, used for settings.
Selects the "Hi-Hi" weight in the check-weighing mode.
Enters the basic function mode. See {Appendix C: Function List}.
Works as a numerical key, 5, used for settings.
Selects the "Lo-Lo limit" weight in the check-weighing mode.
Enters the standard Serial Output mode. See {Appendix C: Function List}.
Works as a numerical key, 4, used for settings.
Selects the "Lo limit " weight in the check-weighing mode.
Enters the weighing sequence function mode. See {Appendix C: Function
List}.
Description
1-7
Advertisement
Table of Contents
