Calf-14=8 Weighing Mode - AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual

6-11 CALF-14=8 Weighing Mode

Check weighing 3)
Output signal
Zero band
Hi-Hi
Hi
Go
Lo
Lo-Lo
• When an output condition is established, a relevant output terminal is turned on (power continuity with the output
common) or off. "Full flow", "Medium flow", and "Dribble flow": OFF, the other outputs: ON.
• Select an output terminal at the outF-01-06 setting. See {Appendix C: Function List}.
• Signal is output only in the normal mode. No output in the calibration mode nor function setting mode.
Output condition
Gross weight ≤ Zero band
Hi-Hi limit < Net weight
Hi limit < Net weight
≤ Net weight ≤ Hi limit
Lo limit
Net weight < Lo limit
Net weight < Lo-Lo limit
6-18