AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual page 90

Function #
FncF-10
0 Disable
1 Not disabled
FncF-11
0 Disable
Not disabled
1
( without tare-clear)
Not disabled
2
( with tare-clear)
FncF-12
0 Disable
1 Not disabled
FncF-13
0 Disable
1 Not disabled
FncF-14
0 None
1 Zero band
2 Full
3 Free fall
4 Zero band, Full
5 Zero band, Free fall
6 Full, Free fall
7 Zero band, Full, Free fall
FncF-15
0 Not disabled
1 Disable on accumulation
2 Disable on manual print
Disable on both accumulation and
3
manual print
Automatic return to the normal mode after indicating
set point data
When no operation from keys for more than 10 seconds, it returns to the
normal mode.
Preset tare weight by code
Preset tare without code number can be recalled in spite of the
setting of "0".
When there is no tare data to be recalled, previous tare weight will be
used.
When there is no tare data to be recalled, it clears the tare data.
Recalling set point data by code
Setting set point code by code
Set point code NOT to be recalled by code
Continuous command of accumulation / manual print
Function name
With this function disabled, command is accepted
only once when the net weight exceeds zero band
value. After that, command will not be accepted
unless load on the scale is removed. This function
is to avoid double accumulation or printing for the
same data.
C-3
Default
1
1
1
1
0
0