AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual page 66

Format Type
Form E
See {Appendix E: Data output examples}
Form F
• This format is available only in the command mode.
• Function Data is read out from Basic functions to Calibration functions.
• "EOF (1Ah)" is output after recalling the last data.
Read-out
Function #
decimal point
FNC01 ,
Form G
Function Data Read-Out/Write-in Format
Setting Data
with polarity and Term.
C
+12345678
R
Code number Read-Out/Write-in Format
Format Name
Set Point Setting Format
•
•
•
•
•
Function #
E
L
O FNC01
F
F
• This format is available only in command
mode.
• Read-out and Write-in are performed in the
following order;
Final (FINAL), Free Fall (F FALL), Prelim
(PRELIM), Optional preliminary (OP
PRELIM), Over Limit (OVER), Under Limit
(UNDER), Full (FULL), Preset Tare (TARE),
Accumulated Weight (TTL WT),
Accumulated Number (TTL NO),
Accumulated Weight Overflow (TTL OF).
• "EOF (1Ah)" is output after recalling the last
data.
• Write-in is performed code by code.
• Overflow/ Underflow flag;
0: Not Overflow / Underflow
1: Overflow / Underflow
8-11
Type B model for the Check
weighing
This format is available only in
command mode.
Data length: 76 bytes ( 60 bytes)
Set "SSXX" command ignoring decimal
point. Decimal point will cause an error.
"RSXX" command ignores decimal
point.
Write-in
Setting Data
with polarity and
decimal point
, +12345678
Term.
C L
R F