Appendix C: Funciton List; Fncf-Basic Functions - AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual

APPENDIX C: FUNCITON LIST

Section related: {5. Function settings}
FncF—Basic Functions
Function #
FncF -01
0 Not disabled
1 Disable
Status display
(lower)
Key
Press a key to be disabled, then press [F] to disable. When disabled, a relevant digit becomes
"1" (Disabled).
When [FUNC.] is disabled
To perform function settings, press [FUNC.] and [ESC] at the same time.
(Generally only [FUNC.] has to be pressed for the function settings, however [FUNC.] has been
disabled. Therefore special key operation should be made.)
FncF-02
0 No function
1 "Manual print" command
2 Hold
3 Batch start
4 Emergency stop
5 Discharge start
6 Clear Zero
7 Clear Tare
8 Clear total accumulated weight and accumulated data of the code now in use.
9 Automatic free fall command
10 Accumulation command
11 Selection of weighing unit.
FncF-03
1 20 times /second
2 10 times /second
3 5 times /second
Function name
key Operation
0 0
↑ ↑
[F] key function
Only effective in the weighing in the built-in automatic program
Display update rate
0 0 0
↑ ↑ ↑
C-1
Default
0 0 0
↑ ↑ ↑
0
0