Display - AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual

1-3 Display

# Name
[1] Main Display
[2] Sub display
Status display
[3]
section (upper)
Status display
[4]
section (lower)
[5] Right LEDs
[6] Left LEDs
A 7-digit 7-segment display. Displays gross weight, net weight, etc
An 8-digit 7-segment display. The display content can be selected at
function settings. See {Appendix C: Function List }
"—" The upper "—" mark indicates the status of the weight.
[ZERO] Illuminates at the center-zero.
• Illuminates at a stable reading.
• The stable condition can be changed at the function
[STABLE]
setting of CALF-09. See, {Appendix C: Function List }
[GROSS] Illuminates with the gross weight displayed.
[NET] Illuminates with the net weight displayed.
Illuminates when the weight display is being held.
Either normal-hold or peak-hold can be selected at
[HOLD]
function settings, FncF-08. See {Appendix C: Function
List }
This display capability can be selected for an application.
AAAA Select at the function settings of FncF-05.
See {Appendix C: Function List }
Illuminates when zero range error, weighing capacity
[ALARM] overflow, low battery, or accumulation data over have
happened.
• Illuminates when a set point output is turned on in the normal mode.
• Indicates a type of set point in the set point setting mode.
• Indicates a result of weighing.
• Indicates content of the sub display In the set point setting mode.
• Indicates content of the sub display.
• Blinks when it is ready to change or erase the settings.
1-3
Description