Table of Contents
Advertisement
5-2 Function Settings
Press [FUNC.] for 0.3 seconds or longer in the normal mode.
"Function"
*
[FUNC.] will not work unless pressed for 0.3 seconds or longer.
*
Press [ESC] to return to the normal mode..
Select and press a function key from the table {5-1. General} to set or see function setting
information.
*
If the wrong key pressed, press [ESC] and return to the normal.
Example: Performing basic function setting.
Press [FUNC.]. Displays show;
Main display:
Input a function number with the numerical keys of [0] - [9] referring to the table {Appendix C:
Function List}.
*
If the wrong number selected, press [ESC] and re-input.
Press [ENTER] to enter the setting of the function number.
Press [ENTER] again. The current parameters are displayed.
Example: Performing FncF-02 setting.
Press [2] and [ENTER] in this order for the function number "02". Displays show;
Main display:
Press [ENETER] again. Displays show;
Main display:
Set a parameter with the numerical keys of [0] - [9] and [+/-].
*
If the wrong parameter has been typed in, press [ESC] to return to the previous value. It returns to
the ready-to-input status.
Press [ENTER] to proceed. The next function number is displayed.
If more functions are to be set, set them using the procedures for step 3 and 4.
Example: Setting a parameter for FncF-02=1.
Press [1] for FncF-02=1. Displays show;
Main display:
Press [ENTER], next number is displayed.
Main display:
Press [FUNC.] to escape from the function setting mode. Function setting data is stored in the
EEPROM and returns to the normal mode.
*
[FUNC.] will not work when a value is displayed on the sub display. In that case press [ENTER] so
that a function number is ready to be input, then press [FUNC.].
1. Enter the function setting mode.
is displayed on the sub display.
2. Press a function key.
"FncF-"
/ Sub display:
3. Input a function number.
"FncF-
2"
/ Sub display:
"FncF-
2"
/ Sub display:
4. Set a parameter to the function.
"FncF-
2"
/ Sub display:
"FncF-
3"
/ Sub display:
5. Escape from the function setting mode.
"
"
"
"
"
0"
"
1"
"
"
5-2
(a current value)
(a new value)
Advertisement
Table of Contents
