Calf-14=7 Weighing Mode - AND Explosion Protected Weighing Indicator AD-4403-FP ST Series Instruction Manual

6-10 CALF-14=7 Weighing Mode

(Check weighing 2)
Output signal
Zero band
Hi-Hi Target weight + Hi-Hi limit < Net weight
Hi Target weight +
Go Target weight -
Target weight - Lo-Lo limit ≤ Net weight < Target weight
Lo
Lo-Lo
• When an output condition is established, a relevant output terminal is turned on (power continuity with the output
common) or off. "Full flow", "Medium flow", and "Dribble flow": OFF, the other outputs: ON.
• Select an output terminal at the outF-01-06 setting. See {Appendix C: Function List}
• Signal is output only in the normal mode. No output in the calibration mode nor function setting mode.
Output condition
Gross weight ≤
< Net weight ≤ Target weight + Hi-Hi limit
Hi limit
≤ Net weight ≤ Target weight + Hi limit
Lo limit
Net weight < Target weight
6-17
Zero band
- Lo limit
- Lo-Lo limit