Display And Operation - AND Weighing Indicator AD-4407 Instruction Manual

8.1.2.

Display and Operation

Action of Accumulating Data
When accumulating data, the display blinks once.
If the accumulated data is stored, the M+ mark is displayed.
Caution This function can not accumulate data with a different unit. Specify a unit
before use.
Display of Accumulation Data
When specifying Cf08 1 (Effective accumulation function) and pressing the
key, the
blinking . Pressing the
the accumulation count. Pressing the
The total data can be output. Refer to "Output of Accumulation Data".
Undoing the Accumulation Data
The last weight data can be deduced from the accumulated data unless new data
has been accumulated.
Step 1 Press the
Step 2 Press and hold the
the data accumulated before accumulating the last weight data is displayed.
Caution External input can not be used.
Clearing the Accumulation Data
Step 1 Press
TOTAL
Step 2 Press and hold the
the accumulated data is cleared.
Caution External input can not be used.
Initializing the Data Number and Clearing the Accumulated Data at the same time
When the data number is included with the data of the serial data output, initializing
the data number and clearing accumulated data can be done at same time.
Step 1 Press
TOTAL
Step 2 Press and hold the
The display blinks once and the accumulated data is cleared. And the data
number is initialized (1).
Caution External input can not be used.
AD-4407 Weighing Indicator
total is displayed and the total data is displayed with the M+ mark
total
key to display
TOTAL
key for more than 3 seconds. The display blinks once and
+/-
key to display
key more than 3 seconds. The display blinks once and
ZERO
key to display
and
ZERO
key alternatively displays the accumulated data and
key, the weight data is displayed.
ESC
total and accumulated data.
total and accumulated data.
total and accumulated data.
keys at the same time for more than 3 seconds.
+/-
Page 33
TOTAL
8. Accumulation