Installing Pci Board - NEC Express5800 Series User Manual

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.
TIPS:
To install the PCI board, make sure the shape of the board connector matches with the shape of
the PCI board slot connector.
1.
Remove the CPU/IO module referring to the page 8-11.
The following steps explain how to install a PCI board on the PCI board slot (PCI-X slot
2, PCI-X slot 3) of the riser card.
Go to step 10 to install a PCI board on the PCI board slot (PCI-X slot 1).
2.
Disconnect the cable from the connector of the riser card.
3.
Loose the 3 fixed screws on the PCI bracket on
the rear side of the device, and remove the PCI
bracket.
4.
Remove the riser card from the motherboard.
System Upgrade 8-33