NEC Express5800 Series User Manual page 119

Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the " " mark and press Enter to display its submenu.
Refer to the table below for information on options.
Main Advanced
System Management
Console Redirection
Event Log Configuration
Monitoring Configuration
Post Error Pause:
AC-LINK:
Power On Delay Time:
F1 Help Select Item -/+ Change Values
Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit
Option
Post Error Disabled
Pause
[Enabled]
AC LINK Stay Off
[Last State]
Power On
Power ON [180]-255(s)
Delay Time
The table below lists how selections for "AC LINK" determine the power status of the server when
ftServer Setup
Security Server
[Enabled]
[Last State]
[180]
Parameter
Set whether or not to pause POST at the end
of POST if an error has occurred during
POST execution.
Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
following table for details.)
Configure the DC ON delay time if AC LINK
is set to "Power On" or "Last State" (unit:
second).
Boot Exit
Additional setup
menu to view
server management
features.
F9 Setup Defaults
Description
[ ]: factory-set
System Configuration 4-19
Item Specific Help