NEC Express5800 Series User Manual page 151

BIOS/FW/etc. Update

The program which is necessary for the update work is transferred to the floppy disk which the
various update modules of BIOS and firmware were stored in. After the reboot, an update
program is started automatically from the floppy disk, and various BIOS and firmware are
updated.
IMPORTANT:
During the execution of the update program, do not turn off the power of the system. If the
update is interrupted halfway, the system will not be able to be started.
System Management

Allow you to make settings of ft Remote Management Card parameters for remote control and
alert.
IMPORTANT:
This menu appears when optional ft Remote Management Cards are installed.
Help

Displays descriptions on features of the NEC EXPRESSBUILDER.
Return to the Top Menu

Displays the NEC EXPRESSBUILDER top menu.
Installing and Using Utilities 5-5