NEC Express5800 Series User Manual page 107

To display POST check results
Select [Advanced] - [Boot-time Diagnostic Screen] - [Enabled].
You can also press Esc while the NEC log is on the screen to display POST check results.
To control from the HW console
Remote operation via Serial

Select [Server] - [Console Redirection], and make necessary settings.
Memory
To check the installed memory (DIMM) status:
Select [Advanced] - [System Memory] and [Extended Memory] and check the status
indications.
Saving the Configuration Data
To save the BIOS configuration data
Select [Exit] - [Exit Saving Changes]
To discard changes to the BIOS configuration data
Select [Exit] - [Exit Discarding Changes]
To restore the default BIOS configuration data (the data may differ from the factory-setting)
Select [Exit] - [Load Setup Defaults].
System Configuration 4-7