NEC Express5800 Series User Manual page 68

IMPORTANT:
If RDR is specified to a disk which contains the system partition or a partition that
cannot be unmounted, the following pop-up message appears. If you click [Yes], the
system is restarted in two minutes automatically. Continue with step 5 after the system
has restarted.
5.
Insert a disk to set duplex configuration into the corresponding slot.
(In this example, a disk is inserted into the Slot 2 of the PCI module 1.)
IMPORTANT:
 When a disk is inserted, a popup window asking for rebooting the system may be
displayed, but there is no need to reboot it. Select [No] and close the popup
window.

For a disk to be inserted, use a new or physically formatted disk which has the
same capacity as the synchronization source. If such a disk is not used, disks are
not duplicated successfully.
For physical format, see "SAS BIOS ~ Adaptec SAS/SATAConfiguration Utility
~" in Chapter 4 "System Configuration" and perform Format Disk with Disk
Utilities. When performing Format Disk, on BIOS Setup Utility, click [Server],
[Monitoring Configuration] and disable [Option ROM Scan Monitoring]. For how
to set up, see "SYSTEM BIOS ~ SETUP ~" on Chapter 4 "System Configuration."
Windows Setup and Operation 3-7