NEC Express5800 Series User Manual page 134

4-34 System Configuration
3. Select one of the "Options" in the menu, and then press the Enter key.
If you want to make settings of the adapter, select "SerialSelect Utility."
If you want to format or verify the hard disk drive connected to the adapter, select "Disk
Utility."
For more information, see the explanation below.
4. To quit, press the Esc key until you see the closing message. (If any changes have been made,
the massage asking you whether or not to save the changes is displayed. Select Yes (save the
changes) or No (discard the changes)).
Exit Utility?
Yes
No