NEC Express5800 Series User Manual page 109

Available options in the Main and descriptions are listed below.
Option
System Time
System Date
CPU Speed
Physical CPUs
System Memory
Extended Memory
Cache Ram
SATAAHCI
Enable
IMPORTANT:
Check and adjust the system clock before operation in the following conditions.
- After transporting the equipment
- After storing the equipment
Check the system clock once in a month. It is recommended to operate the system clock using a
time server (NTP server) if it is installed on the system which requires a high level of time
accuracy. If the system clock goes significantly out of alignment as time goes by, though the
system clock adjustment is performed, contact your sales agent.
Parameter
HH:MM:SS
MM/DD/YYYY
XXXX MHz
X
XXXX KB
XXXX MB
XXXX KB
[Disabled]
Enabled
Description
Specify the system time.
Specify the system date.
Displays the processor clock frequency.
Displays the number of processor installed.
Displays the size of system memory.
Displays the size of extended memory.
Displays the capacity of LS cache.
Specify whether or not to enable AHCI mode.
[ ] factory - set
System Configuration 4-9