NEC Express5800 Series User Manual page 126

4-26 System Configuration
Boot
Move the cursor onto "Boot" to display the Boot menu.
The server searches for the boot device according to the order specified in this menu and uses the
software to boot the system if found.
Main Advanced
CD-ROM Drive
Removable Devices
+Hard Drive
Network (IBA GE Slot 7C00 v1236)
Network (IBA GE Slot 7C01 v1236)
F1 Help
Esc Exit
You can change the boot device order using or and + or –. Move the cursor to select the device
by or , and then change the priority using + or –.
IMPORTANT:
Move the CD-ROM Drive above Hard Drive to start the NEC EXPRESSBUILDER.
ftServer Setup
Security Server
Select Item -/+ Change Values
Select Menu Enter Select Sub Menu F10 Save and Exit
Boot Exit
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a +
expands
all
<Shift + 1> enables or
disables a device.
<+> and <-> moves the
device up or down .
F9 Setup Defaults
Item Specific Help
or <Ctrl+Enter>