NEC Express5800 Series User Manual page 291

Secure the handle with the screws. If it is not secured by the screws, the operation of the

CPU/IO module will be unstable.
In some system statuses or settings, auto start up or integration does not take place when

the module is connected. In such a case, check the status by using the ftServer Utility or
NEC ESMPRO Manager data viewer, and then start up the CPU/IO modules.
3.
Connect the cables for connecting the peripheral devices and network.
4.
Hold the stopper with your hand and insert the cable of the installed module.
5.
The installed CPU/IO module will be automatically started.
IMPORTANT:
System Upgrade 8-15