NEC Express5800 Series User Manual page 236

RELOCATING/STORING THE NEC Express5800/320Fc series
Follow the procedure below to relocate or store the server.
Observe the following instructions to use the server safely. There are risks of
fire, personal injury, or property damage. See "PRECAUTIONS FOR SAFETY"
in Chapter 1 for details.
IMPORTANT:
Make sure to make a backup copy of your valuable data in the hard disk, if any.
When moving the server with hard disks installed, make sure there is no sudden impact
to the hard disks.
When storing the server, keep it under storing environment conditions (temperature: -10
to 55 umidity: 20 to 80%, non-condensing).
°C, h
1.
Take floppy disks or CD-ROMs out of the server, if any.
2.
Power off the server.
3.
Unplug the power cord of the server from power outlet.
4.
Remove all the cables from the server.
5.
Remove all the mounted CPU/IO modules.
6.
Remove the 4U chassis and the rails from the rack cabinet.
7.
Carry 4U chassis and CPU/IO modules separately.
8.
Protect the server with the shock-absorbing materials, and pack it securely.
Never attempt to lift the server by yourself.
Do not install the server in any place other than specified.
Do not connect/disconnect any interface cable with the power cord of the
server plugged to a power source.
CAUTION
Maintenance 6-9