Console Redirection - NEC Express5800 Series User Manual

Option
SDR Revision
PIA Revision
ASIC Rev
SMM Rev

Console Redirection

Select "Console Redirection" on the Server menu and press Enter to display the following screen.
Main Advanced
Console Redirection
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C.R. after POST: [Off]
F1 Help Select Item -/+ Change Values
Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit
See the table below for setup options on the screen.
Option
Com Port Address
Baud Rate*
Parameter
ft Server Setup
Security Server
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
Parameter
[Disabled]
Serial Port1
Serial Port2
9600
Description
Displays the revision of SDR (sensor
device information).
Displays the PIA (plat form information)
revision.
Displays the firmware information of the
fault-tolerant chipset.
Displays the firmware information of
System Management.
Boot Exit
If enabled, it will
use a port on the
motherboard.
F9 Setup Defaults
Description
Select a serial port.
Select a port rate used for the interface with a
System Configuration 4-21
[ ]: factory-set
Item Specific Help