Installing Pci Board - NEC NovaScale R630 User Manual

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.
TIPS:
To install the PCI board, make sure the shape of the board connector matches with the shape of the PCI board slot
connector.
1.
Remove the CPU/IO module referring to the page 8-11.
The following steps explain how to install a PCI board on the PCI board slot (PCI-X slot 2, PCI-X slot 3) of the
riser card.
Go to step 10 to install a PCI board on the PCI board slot (PCI-X slot 1).
2.
Disconnect the cable from the connector of the riser card.
3.
Loose the 3 fixed screws on the PCI bracket on the rear side of the
device, and remove the PCI bracket.
4.
Remove the riser card from the motherboard.
5.
Insert optional PCI boards into the two PCI slots of the riser
card.
8-29