NEC Express5800 Series User Manual page 77

3-16 Windows Setup and Operation
Set As Active RDR Plex
A physical disk can be set as "Active RDR Plex" by a command.
Active RDR Plex is the disk on which data reading process is performed when Load Balancing of
RDR Virtual Disk is off.
1.
Start RDR Utility and right-click a target disk in the left pane and click [Set As Active RDR
Disk].
2.
In the [Set As Active RDR Plex] dialog box, click [OK].
Active RDR Plex can be viewed from [Active RDR Plex] of RDR Virtual Disk. (In the image
below, the disk in the slot 2 of PCI module 0 is set to Active RDR Plex among physical disks
constructing RDR Virtual Disk 2.)