NEC Express5800 Series User Manual page 183

Monitoring SCSI adapter on PCI module
To monitor the SCSI adapters on the PCI modules, see the [SCSI adapter] tree. To see the
information on the [SCSI adapter] tree, select [PCI Module][PCI module (connected to SCSI
adapter to be seen)][SCSI adapter] of the [ft] tree.
You can see the following information on the SCSI adapters in the [SCSI adapter] tree. This
function is not supported in the current version.
General

Allows the SCSI configuration information to be viewed. This function is not supported in
the current version.
Maintenance

Allows the MTBF information of SCSI adapters to be viewed and cleared. This function
is not supported in the current version.
Update

Allows the firmware of SCSI adapters to be updated. This function is not supported in the
current version.
SCSI bus

Allows the information on the SCSI bus connected to SCSI adapters and devices to be
viewed. This function is not supported in the current version.
Monitoring Ethernet adapter on PCI module
To monitor the Ethernet adapters on the PCI modules, see the [Ethernet adapter] tree. To see the
information on the [Ethernet adapter] tree, select [PCI Module][PCI module (connected to the
Ethernet adapter to be seen)][Ethernet adapter] of the [ft] tree. You can see the following
information on the Ethernet adapters in the [Ethernet adapter] tree.
IMPORTANT:
Disable the unused Ethernet adapter (that is not connected to cables) by using [Network
Connection] in Control Panel. However, if the Ethernet adapter to be disabled is set to dual LAN
configuration (AFT feature), disable it after removing dual LAN configuration. If it is not disabled
and the cable is not connected to it, ESMPRO/ServerAgent determines that the port is faulty (does
not have any media), and the status color of [ft] - [PCI module] - [Ethernet Board] of the data
viewer turns red (abnormal). The server status color of the integrated viewer also turns red
(abnormal).
General

This function is not supported in the current version.
Detail

This function is not supported in the current version.
Maintenance

This function is not supported in the current version.
Installing and Using Utilities 5-37