NEC Express5800 Series User Manual page 112

4-12 System Configuration
I/O Device Configuration
When you select "I/O Device Configuration" in the Advanced menu, the following screen appears.
If you select a menu with the " " mark and press Enter, its submenu appears.
Main Advanced
I/O Device Configuration
Serial Port1:
Base I/O address:
Serial Port 1 Connection: [Serial Connector]
Serial Port2:
Base I/O address:
Serial Port2 Sharing
Keyboard Features:
NumLock:
F1 Help Select Item -/+ Change Values
Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit
Refer to the table below for information on options.
Option
Serial Port 1
Base I/O address
Serial Port 1 Connection
Serial Port 2
Base I/O address
Serial Port 2 Sharing
Keyboard Features
ftServer Setup
Security Server Boot
[Enabled]
[3F8/IRQ 4]
[Enabled]
[2F8/IRQ 3]
[Disabled]
[Off]
Parameter
Enabled
[Disabled]
Auto
[3F8/IRQ4]
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
[Serial
Connector]
Internal
Modem
Enabled
[Disabled]
Auto
3F8/IRQ4
[2F8/IRQ3]
3E8/IRQ4
2E8/IRQ3
Enabled
[Disabled]
Exit
Item Specific Help
Configure Serial Port 1
using options:
[Disabled]
configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
NOTE:
Serial Port 1 may not
be routed to the Modem
F9 Setup Defaults
Description
Specify whether or not to enable Serial Port 1.
Specify the I/O address and IRQ of Serial Port 1.
Specify Serial Connector or Internal Modem for
Serial Port 1 connection.
Specify whether or not to enable Serial Port 2.
Specify the I/O address and IRQ of Serial Port 2.
Specify whether or not to use Serial Port 2 in
BMC.
Display only.
No