NEC Express5800 Series User Manual page 171

the available time from Add Printer Wizard, the printer's available time (From and To) in [Printers
and Faxes] are [00:00], on the other hand, Manager's time are [9:00]. To display them properly,
make the settings of printer from [Printers and Faxes]. The procedures are as follows;
4.
Start [Printers and Faxes], and open the printer properties you want to make settings for.
(Select the [Printers and Faxes], right-click and select [Properties].)
5.
Select the [Advanced] tab.
6.
Enter values in the available time (From and To), and click [OK] in the [Advanced] and
[Properties] dialog boxes.
Now, you can see the correct information from Manager, too.
Disk Maintenance while NEC ESMPRO Agent is Running
While NEC ESMPRO Agent is running you can not format or delete a partition by Disk
Administrator or other utilities for either hard disk drive or magneto optical.
To request programmatically to remove media from removable disks such as MO, Zip and PD.
1.
Select the [Start] – [Settings] – [Control Panel]
2.
Open the [Service]
3.
Select a service named "ESMCommonService", and click the [Stop].
4.
Confirm that "ESMCommonService" stopped, and close the [Service].
5.
Do the disk-related works.
6.
Open the [Service] again, select "ESMCommonService" and click the [Start].
7.
Confirm that "ESMCommonService" is active and close the [Service] and [Control
Panel].
Connection with Hard Disk Drive
The preventive hard disk drive maintenance function may not work properly when a hard disk drive
which was used in a system where NEC ESMPRO Agent was installed is transfer to another system.
Change Settings of File System Monitoring Function
New settings in thresholds of monitoring interval and free space monitoring are not reflected
immediately after they are changed. They are reflected at the next monitoring interval of monitoring
service.
CPU Load Ratio of SNMP Service (snmp.exe)
While monitoring the server from NEC ESMPRO Manager, the CPU load ratio of SNMP Service
on the NEC ESMPRO Agent side may increase at every monitoring interval (default: 1 minute).
NEC ESMPRO Manager and NEC ESMPRO Agent exchange information through SNMP Service.
If the server status monitoring by NEC ESMPRO Manager is on (default: ON), NEC ESMPRO
Installing and Using Utilities 5-25