and insert the hard disk into the slot.
TIPS:
Insert the disk until the lever hook touches the server
frame.
Check the orientation of lever. Insert the hard disk with
the lever unlocked.
8.
Slowly close the lever.
When the lever is locked, you
will hear a click sound.
IMPORTANT:
Be careful not to pinch your
finger(s) between the lever and
handle.
TIPS:
Check the hook of the lever is
engaged with the frame.
8.
Press the POWER switch to power on.
9.
Install the front bezel.
10.
Set the dual disk configuration (see "Step 8: Set Dual Disk Configuration" in Chapter 4 in the
User's Guide (Setup).).
System Upgrade 8-7