NEC Express5800 Series User Manual page 97

3-36 Windows Setup and Operation
When you stop the operation of a CPU module, the indications of the status LEDs change as
follows. Below denotes that the only one CPU module is operating.
[Indications of status LEDs]
1 CPU/IO module status LED1
2 CPU/IO module status LED2
3 DISK ACCESS LED

As an example, the indications of when CPU module 0 is stopped are shown.
3.
Press the start button of the CPU module stopped by ft server utility.
In the ft server utility, select the stopped CPU module and click [Up] of [Bring Up/Bring
Down].
Once the CPU module is started, hardware diagnosis and then synchronization of memory
(memory copy) are performed, and the duplication process is completed.
Note that the system is paused temporarily for copying memory during memory
synchronization.
[Indications of status LEDs during diagnosis]
1 CPU/IO module status LED1
2 CPU/IO module status LED2
3 DISK ACCESS LED
[Indications of status LEDs after completion of duplication]
1 CPU/IO module status LED1
2 CPU/IO module status LED2
3 DISK ACCESS LED
LED
LED
LED
CPU module 1
(Stopped)*
Amber
-
Green blinking
CPU module 0
(Started)
-
-
Green blinking
CPU module 0
(Operating)
-
Green
Green blinking
CPU module 2
(Operating)
-
Green blinking
Green blinking
CPU module 1
(Operating)
-
Green blinking
Green blinking
CPU module 1
(Operating)
-
Green
Green blinking