3-10 Windows Setup and Operation
Removing duplex configuration of RDR disks
This section describes how to remove duplex configuration from the disk with RDR utility.
In the example below, the duplication setting of the disks in the Slot 2 of the PCI modules 0 and 1 is
removed.
IMPORTANT:
After executing the command, RDR meta data will be removed but other data will remain.
You cannot release the duplex setting of the following disks:
Disk containing page files
Dynamic disk
To release the dual disk setting including the boot partition/volume, return the disk status to
the Simplex first and then release the setting.
The display of RDR Utility is not updated automatically. Therefore, update it every time
you check the status of disks by clicking [Refresh] from [Action] on the menu or pressing
F5.
1.
Start the RDR Utility, right-click a disk you want to cancel RDR from the tree in the left pane,
and select [Delete RDR configuration on Physical Disk].
2.
Confirm that RDR of the disk is cancelled.