NEC Express5800 Series User Manual page 102

4-2 System Configuration
SYSTEM BIOS ~ SETUP ~
The SETUP utility is provided to make basic hardware configuration for the server. This utility is
pre-installed in the flash memory of the server and ready to run.
The server is configured with the correct parameters using the SETUP utility and shipped with the
ideal parameters already set. Thus, you do not need to use the SETUP utility in most cases.
However, you might wish to use the SETUP utility in the cases described below.
IMPORTANT:
The SETUP utility is intended for system Administrator use only.

The SETUP utility allows you to set a password. The server is provided with two levels of

password: Supervisor and User. With the Supervisor password, you can view and change all
system parameters of the SETUP utility. With the User password, system parameters
available for viewing and changing are limited.
Do not set any password before installing the OS.

The server contains the latest version of the SETUP utility. Dialog boxes appearing on your

SETUP utility may differ from descriptions in this User's Guide. If you find anything
unclear, see the online help or ask your sales agent.