NEC Express5800 Series User Manual page 66

1.
Insert a new disk to a built-in slot.
(In this example, a disk is inserted to the Slot 2 of the PCI module 0.)
2.
From [Start], select [Control Panel] then [Administrative Tools] and start [Computer
Management]. On the tree in the left pane, click [Disk Management].
If the inserted disk is indicated as [Not Initialized] in the right pane, right-click the disk and
initialize it.
IMPORTANT:
When a disk is inserted or initialized, a popup window asking for rebooting the system
may be displayed, but there is no need to reboot it. Select [No] and close the popup
window.
3.
Start RDR Utility.
IMPORTANT:
If the inserted disk does not appear on the tree, from the menu of RDR Utility, select

[Action] and click [Refresh] or press F5 to update the display after awhile.
The display of RDR Utility is not updated automatically. Therefore, update it every time

after you perform disk operations described below.
4.
On the left tree of RDR Utility, right-click a disk to set RDR and click [Create RDR Virtual
Disk].
IMPORTANT:
Depending on the disk condition, RDR setting may take some time and RDR Utility
may pause for a few minutes. There is no error, so wait until the process is completed.
Windows Setup and Operation 3-5