NEC Express5800 Series User Manual page 70

For 18GB partition, it takes about 16 minutes.
If no partitions exist, synchronization will be complete in a very short period and the
disk may become synchronized.
If the system is rebooted during synchronization, the process cannot be completed. Do

not restart the system until the synchronization is completed.

Synchronization completed
Source disk
Destination disk
RDR Virtual Disk
IMPORTANT:
When a new partition is created on the disk where RDR is set, the created partition area

is synchronized automatically.
When the virtual disk is converted to a dynamic disk, any area, which has not been

previously synchronized (area where no partition exists), will also be synchronized.
When a system is shut down improperly, by pressing the power button, the entire area

of the synchronized disks will be resynchronized after the system is restarted.
DISK ACCESS
LED
Green
(Blinking)
Green
(Blinking)
Windows Setup and Operation 3-9
RDR Utility
Op State: State
Duplex
Duplex
Duplex
Status
None