NEC Express5800 Series User Manual page 114

4-14 System Configuration
Option ROM Configuration
When you select "Option ROM Configuration" in the Advanced menu, the following screen
appears.
Main Advanced
Option ROM Configuration
Embedded SAS Option ROM:
Embedded PXE#1 Option ROM: [Enabled]
Embedded PXE#2 Option ROM: [Enabled]
F1 Help Select Item -/+ Change Values
Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit
Refer to the table below for information on options.
Option
PCI Slot 1 (upper) Option ROM
PCI Slot 2 (lower) Option ROM
PCI Slot 3 (onboard) Option ROM
Embedded SAS Option ROM
Embedded PXE#1 Option ROM
ftServer Setup
Security Server Boot
[Enabled]
Parameter
Enabled
[Disabled]
Enabled
[Disabled]
Enabled
[Disabled]
[Enabled]
Disabled
[Enabled]
Exit
Item Specific Help
Enables Embedded SAS
Option ROM to boot
from the device.
Default state: ENABLED
F9 Setup Defaults
Description
If "Enabled" is selected, the extended ROM of
the PCI card installed on PCI Slot 3 is initialized.
Note: this option is displayed only when a PCI
card is installed.
If "Enabled" is selected, the extended ROM of
the PCI card installed on PCI Slot 2 is initialized.
Note: this option is displayed only when a PCI
card is installed.
If "Enabled" is selected, the extended ROM of
the PCI card installed on PCI Slot 1 is initialized.
Note: this option is displayed only when a PCI
card is installed.
If "Enabled" is selected, SAS extended ROM
that is embedded in the motherboard will be
initialized.
If "Enabled" is selected, the extended ROM of