Usb Settings - Fuji Xerox DocuPrint C2120 User Manual

Adobe Protocol

USB Settings

Specifies the settings for the USB interface.
Note
• You need to restart the printer to activate the new settings. After making the settings, turn the printer off
and on.
Port Status
Adobe Protocol
90
5 Control Panel Menus
Item
Sets the PostScript communication protocol.
• [Auto] (default)
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
• [TBCP]
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
Note
• Select an appropriate option according to the data format specified on your
print driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Item
Sets whether or not to enable the USB port.
• [Enable] (default)
• [Disable]
Sets the PostScript communication protocol.
• [TBCP] (default)
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
• [Binary]
Select this when no special processing is required for data.
• [Auto]
Automatically detects the PostScript communication protocol.
• [Standard]
Select this when the communication protocol is in ASCII format.
• [BCP]
Select this when the communication protocol is in binary format.
Note
• Select an appropriate option according to the data format specified on your
print driver.
• [Adobe Protocol] is valid only when printing in PostScript.
Description
Description