Fax Fwd Number; Prefix Dial Num; Discard Size - Fuji Xerox DocuPrint CM215 Series User Manual

• Fax Fwd Number

Purpose:
To enter the fax number of the destination to where incoming faxes will be forwarded.
• Fax Fwd E-Mail
Purpose:
To enter the e-mail address to where incoming faxes will be sent with an e-mail.
• Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
Off*
On

• Prefix Dial Num

Purpose:
To set a prefix dial number of up to five digits. This number dials before any auto dial number is
started. It is useful for accessing the Private Automatic Branch Exchange (PABX).

• Discard Size

Purpose:
To set whether to discard text or images at the bottom of a fax page when the entire page does not fit
onto the output paper.
Values:
Off
On
Auto Reduction*
• ECM
Purpose:
To set whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines
must also support the ECM.
Values:
Off
On*
Does not set a prefix dial number.
Sets a prefix dial number.
Prints any excess at the bottom of a fax page without discarding it.
Discards any excess at the bottom of a fax page.
Automatically reduces a fax page to fit it onto the output paper.
Disable the ECM.
Enables the ECM.
Using the Operator Panel Menus and Keypad 311