Initial Settings On Operator Panel; Setting Initial Settings On The Operator Panel - Fuji Xerox DocuPrint M255 z User Manual

Setting Initial Settings on the Operator Panel

You need to set the printer language and the clock date and time when you turn on the printer for the
first time.
When you turn on the printer, a wizard appears on the LCD panel. Follow the steps below to configure
the initial settings.
NOTE:
• If you do not start configuring the initial settings, Select Function appears on the LCD panel in three
minutes. After that, you can configure the following initial settings by selecting Power On Wizard on the
operator panel as needed.
For details on the operator panel, see
1
Select the language you want to use on the operator panel, and then press the
2
Press the button to start setting the region.
3
Select your region, and then press the
4
Select the appropriate time zone, and then press the
5
Specify the current date, and then press the
6
Specify the current time, and then press the
7
Press the button for fax setup.
If you want to skip the fax setup, press the
8
Enter your fax number, and then press the
9
Enter a name, and then press the
10
Press the button to complete the initial settings on the operator panel.
"Understanding the Operator Panel Menus" on page
button.
button.
button.
(Start) button.
button.
button.
button.
Basic Operation
282.
button.
45