Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual page 81

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
The Modification Table Entry Properties dialog appears.
3 In the Actions section, click Add to include the modification to be
applied when the condition is met.
The Action Properties dialog appears.
4 Indicate whether to start the modification from the beginning or
from the end of the number, in the Start From field.
5 Enter the digit offset value from which the modification will be
made, in the Offset field.
The offset is from left to right when starting from the beginning,
right to left when starting from the end. Default value is 0.
6 Enter the number of digits to modify in the Digits to Replace
field, or check the Until End/Beginning box, to replace all the
digits after the offset.
Specify the replacement digits in the Replace With field. If
Note:
nothing is specified, the modified digits will simply be
removed.Acceptable digits, relative to a sample of typical fax
Chapter 4 Web Administrator: System Configuration
81