Adding Actions In A Number Modification Entry - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Chapter 4 Web Administrator: System Configuration

Adding actions in a number modification entry

80
The Modification Table Entry Properties dialog appears.
2 Enter a fax number or a numeric pattern in the Pattern field.
Wildcards can be specified. The asterisk (*) represents any number
of digits; the question mark (?) represents a single digit.
3 In the Condition field, select a condition.
Conditions available are At least, Equal and Less Than. The
combination of condition and number of digits indicates what must
appear in the fax number entered by the user, to qualify for number
modification. Assuming the pattern 1212*, a condition of Equal and
11 digits would apply the pattern to faxes addressed to numbers in
New York.
4 Enter the number of digits in the Number Of Digits field. For
example, the pattern 1212* would be a long distance number and
the entry would be 11 digits.
5 Select the Stop on Match option if OmniTouch Fax Server is to stop
searching the modification table when a match is found.
6 In the Actions section, add as many actions as required.
7 Click OK.
1 In the Web Administrator, select Configuration|Modification
Table.
2 Selecr an entry and then select Properties.
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01