Chapter 1 Introduction; Default License; T38 Faxdrivers - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Hide thumbs Also See for OmniTouch Fax Server Application:

Table of Contents

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01

This manual is for system administrators running OmniTouch Fax

Server in the Linux operating system.

This manual describes the following:

• fax networking concepts and

• hardware and software installation

• installation and operation of advanced components such as the

rasterization services, the XML gateway, mail gateways, etc...

• user and resource management,

• advanced operations such as configuring inbound auto-routing and

least-cost routing and load balancing.

When installing OmniTouch Fax Server, on a new system, a default

license is available for evaluation purposes. This demo license

enables one instance of each component and a total of two channels

of any type (T38) in evaluation mode . The default license allows for

100 users and applies a watermark on every fax page.

The number of channels is set in the Administration module.

OmniTouch Fax Server permits a maximum of four ports. There are

two settings to configure:

1 Maximum number of channels - this represents the total number

of channel objects available for configuring in the Web Administrator

for the given driver. A change of value will be applied only at the

next startup of the corresponding driver.

Preferred number of channels - this represents the optimal

number of channels the driver should acquire when the system is

fully up and running.

Introduction

Table of Contents

Show Quick Links

Table of Contents