Setting Fax Resolution - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Setting fax resolution

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
In both cases, the default entry is 3. The greatest number of retries
available is 99.
7 The default delay between retries is 5 minutes. Enter a different
value if desired.
8 Click OK.
1 In the Web Administrator, select Configuration|Profiles.
2 In the right panel of the Web Administrator, select the profile for
which you would like to set the fax resolution.
3 Select Properties.
4 Click the Fax Options tab.
5 In the Resolution section, enter the default fax resolution, in the
Default field. Available options are: Low, High, Fine or Ultra
Fine.
6 Enter the maximum fax resolution possible, in the Maximum field. A
user who is allowed to change the fax resolution, cannot exceed the
maximum profile value.
7 Click OK.
Chapter 3 Web Administrator Site Configuration
25