Configuring The Incoming Routing Table Properties - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Chapter 3 Web Administrator Site Configuration

Configuring the incoming routing table properties

42
If all of the incoming routing table rules fail, the incoming fax is
archived without having been delivered, unless a default routing
destination is specified in the incoming routing table properties.
1 In the Web Administrator, select Configuration|Incoming
Routing Table.
2 Select the checkbox for Directories Lookup, and then click
Properties.
The Default Settings window appears.
3 Check the Use this destination for misrouted faxes box,
to enable the use of a default routing address.
4 In the Type field, select either User, Mail or Printer.
5 In the User field, select the notification destination that you want
to use as default.
Users are defined in the Users node. Refer to Internal Users on page
13.
Note: If the option to install the First Time Setup Wizard was
selected at initial installation, your system would have been
preconfigured to begin faxing immediately. The wizard also sets the
Site routing table to route to the User.
Additional notification destinations, such as printers, are originally
defined in the Notification Destinations node. Refer to
Notification destinations on page 31.
6 Click OK.
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01