Routing Using Ani, Csid, Dtmf Or Dnis/Did - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Routing using ANI, CSID, DTMF or DNIS/DID

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
1 In the Web Administrator, select Configuration|Incoming
Routing Table.
2 Select Add Direct Rule.
3 Select any or all of the Match DNIS/DID, Match ANI, Match CSID
and Match DTMF boxes, depending on which routing methods you
want to use.
4 In the fields beside the first four check-boxes, enter the routing
string to look for.
In the case of CSID routing, the routing string is the call station ID
used by the remote fax sender.
In the case of ANI, DTMF and DNIS/DID routing, the routing string is
the ANI, DTMF or DNIS/DID number of the fax recipient. Wildcards
are allowed. The asterisk (*) specifies any number of characters; the
question mark (?) specifies any single character.
5 Add routing destinations as needed. Refer to Adding a routing
destination on page 44.
6 If OmniTouch Fax Server is to continue to the next routing rule,
select the option If this routing entry matches, continue
Chapter 3 Web Administrator Site Configuration
43