Modifying A Routing Rule; Changing The Priority Of A Routing Rule; Removing A Routing Rule - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Modifying a routing rule

Changing the priority of a routing rule

Removing a routing rule

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
ANI=6331493, "$ani:\?xxxx$" would give "?1439";
ANI=6331493, "$ani:\\xxxx$" would give "\1439".
OmniTouch Fax Server searches the facsimiletelephonenumber
field until a match is found. The fax is then routed to the user whose
facsimiletelephonenumber field contains the match.
5 If OmniTouch Fax Server is to continue to the next routing rule,
select the option If this routing entry matches, continue
processing the routing table. You would select this option when
successive rules route the same faxes to several destinations, for
example to a printer and several users.
6 Click OK.
1 In the Web Administrator, select Configuration|Incoming
Routing Table of your site.
2 Select the checkbox for the routing rule you want to modify.
3 From the lower right area, select Properties.
The Routing dialog appears.
4 Make whatever modifications are required.
5 Click OK.
To change the priority of a routing rule, you can move it up (higher
priority) or down (lower priority), in the incoming routing table.
1 In the Web Administrator, select Configuration|Incoming
Routing Table.
2 In the right panel of the Web Administrator, select the checkbox of
the routing rule whose priority you want to change.
3 Select Move Up or Move Down.
1 In the Web Administrator, select Configuration|Incoming
Routing Table.
2 In the right panel of the Web Administrator, select the checkbox of
the routing rule that you want to delete.
Chapter 3 Web Administrator Site Configuration
47