Chapter 3 Web Administrator Site Configuration
Modifying a profile
Profile Lookup Table
Profiles
34
1 In the Web Administrator, select Configuration|Profiles.
2 In the right panel of the Web Administrator, select the checkbox of
the profile for you would like to modify.
3 Select Properties.
4 Make whatever modifications are required, in the various sections.
5 Click OK.
The Profile Lookup Table holds a set of rules used by the system to determine
a user's Profile. These rules are based on the Attributes provided by the
Directories Integration and can be applied once the user's Site is mapped. As
soon as a Profile is required, the system applies the Profile Lookup Table. For
more information about Attributes, refer to Directories Integration on page
73.
Two methods can be used to select a Profile:
•
Configure the system to use the value of any Attribute as a Profile (User
Attributes)
OR
•
Use a rule to map users directly to a specific Profile
In both cases, the rules can be configured to use Conditions.
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01