Page 2
Specifications in this manual are subject to change without notice. Originated in the USA. AOS-W, Alcatel 4308, Alcatel 4324, Alcatel 6000, Alcatel 41, Alcatel 60/61/65, Alcatel 70, and Alcatel 80 are trademarks of Alcatel-Lucent in the United States and certain other countries.
Preface An Overview of This Manual This manual is for network administrators and operators responsible for managing the Alcatel-Lucent OmniAccess WLAN Switch. Contents This manual provides information about AOS-W MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide.
Information about Voice over IP—call status and call details. Voice Chapter 19 Information about wide local area network (WLAN). WLAN Chapter 20 Information about the Alcatel AMAP and GMAP protocols. AMAP Protocol Chapter 21 Reference—list of SNMP MIBs and associated OIDs. SNMP MIBs Reference Related Documents The following items are part of the complete documentation for the AOS-W 3.4 Software:...
EDCA Enhanced Distributed Channel Access EIRP Effective Isotropic Radiated Power External Services Interface ESSID Extended Service Set Identifier Generic Routing Encapsulation Graphical User Interface Home Agent Table High Throughput Internet Authentication Service AOS-W 3.4 MIB | Reference Guide Preface |...
Page 16
Power over Ethernet PPTP Point-to-Point Tunneling Protocol Pre-Shared Key Quality of Service RADIUS Remote Authentication Dial In User Service Remote Access Point Radio Frequency RMON Remote Monitor Rivest-Shamir-Aldeman (encryption algorithm) Session Initiation Protocol | Preface AOS-W 3.4 MIB | Reference Guide...
Web Site Support Main Site http://www.alcatel-lucent.com/enterprise Support Site https://service.esd.alcatel-lucent.com Support Email support@ind.alcatel.com Telephone Support North America 1-800-995-2696 Latin America 1-877-919-9526 Europe +33 (0) 38 855 6929 Asia Pacific +65 6240 8484 Worldwide 1-818-878-4507 AOS-W 3.4 MIB | Reference Guide Preface |...
1.3.6.1.4.1.14832 both represent the private enterprise node Aruba, as shown in Figure 1 on page Aruba is the parent of most of the proprietary MIBs that are supported on Alcatel-Lucent OAW WLAN Switches. sysObjectIDs for the Alcatel-Lucent OAW switches are allocated from the Alcatel-Lucent MIB tree.
Network devices include workstations, routers, microwave radios, and other network components. MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the Managers and Agents to communicate specific data requests and data returns. | MIBs Overview AOS-W 3.4 MIB | Reference Guide...
Ping alarms are used to ping network devices at regular intervals. If a device fails to respond, an alarm (SNMP trap) will be sent. Control Relays Relay outputs enable operating remote site equipment. AOS-W 3.4 MIB | Reference Guide MIBs Overview |...
Page 22
Group on page 246 Switch Traps–Notifications on page 252 Platform Traps on page 255 IPv6 Authentication Traps on page 259 Alcatel-Lucent AMAP/GMAP are described in the following sections: aipAMAPTraps-0 on page 506 aipGMAPTraps-0 on page 507 | MIBs Overview AOS-W 3.4 MIB...
Downloading MIB Files, above. It is assumed that the workstation is connected to the Alcatel-Lucent switch and that a MIB browser is available. For most applications, the root of the MIB must be included in the OID—the OID begins with a decimal point as shown below.
Tx Packets per AP BSSID (32-bit counter) Building Number of Interfering APs per Switch Tx Bytes per AP BSSID (32-bit counter) Noise Level per AP Rx Packets per AP BSSID (32-bit counter) | Using MIBs AOS-W 3.4 MIB | Reference Guide...
Page 25
-v 2c -m ALL -c <snmp community name> <AP IP addr> .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | grep -c "unsecure" Number of Interfering APs per Switch wlsrAmRAPType .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 snmpwalk -v 2c -m ALL -c <snmp community name> <AP IP addr> .1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | grep -c "interfering" AOS-W 3.4 MIB | Reference Guide Using MIBs |...
Page 26
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14 | grep "<ap bssid in decimal format>" Frame Receive Error Rate per AP BSSID apBSSFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 snmpwalk -v 2c -c <snmp community name> <switch IP addr> .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 | grep "<ap bssid in decimal format>" | Using MIBs AOS-W 3.4 MIB | Reference Guide...
Page 27
-v 2c -c <snmp community name> <switch IP addr> .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4 | grep "<ap bssid in decimal format>" Frame Receive Errors per AP Channel This information is available from any Alcatel-Lucent switch. apChannelFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 snmpwalk -v 2c -c <snmp community name> <switch IP addr>...
ASCII file. The contents of an example Aruba enterprise MIB file, aruba-cts.my, are described below. Opening Line Following is the opening line, the beginning of the MIB file. WLSX-CTS-MIB DEFINITIONS ::= BEGIN | Using MIBs AOS-W 3.4 MIB | Reference Guide...
Page 29
, which indicates the OID is wlsxCtsRequestTable OBJECT-TYPE wlsxCtsOpGroup 1 1.3.6.1.4.1.14823.2.2.1.11.1.1. All MIBs and their related OIDs are listed in the snmp file of ArubaOS. For more information, see SNMP File on page wlsxEnterpriseMibModules FROM ARUBA-MIB; AOS-W 3.4 MIB | Reference Guide Using MIBs |...
To install the Aruba module for HP OpenView, log in as the root user and execute the following script: # $OV_CONTRIB/NNM/Aruba/install For detailed assistance to use HP OpenView, please contact your Alcatel-Lucent support representative. For contact information, see Contacting Alcatel-Lucent on page MIB Limitations Following are the known limitations and constraints of Aruba MIBs.
LAN. The Alcatel-Lucent AP can also function as an air monitor (AM), which scans the RF spectrum, and can be used to enhance the performance of the AP.
S ta Frame Type S tats Table 1.3.6.1.4.1.14823.2.3.1.1.3.4.4 1.3.6.1.4.1.14823.2.3.1.1.3.4.5 wisr S ta Pkt S ize S tats Table 1.3.6.1.4.1.14823.2.3.1.1.4 wisr Air Monitor Group 1.3.6.1.4.1.14823.2.3.1.1.4.1 wisr Air Monitor Ap List Group | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 38
27 wlsrConfigEntry Syntax wlsrConfigEntry Max-Access not-accessible Status current Description A WiFi configuration entry. Index { wlsrBSSID } wlsrBSSID Syntax MacAddress Max-Access not-accessible Status current Description BSSID of the WiFi Interface. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 39
Syntax Integer (0..2347) Max-Access read-only Status current Description This attribute shall indicate the number of octets in an MPDU, below which an RTS/ CTS handshake shall not be performed. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 40
This attribute indicates whether power management is enabled or not. wlsrLoadBalance Syntax Integer enable(1) disable(2) Max-Access read-only Status current Description This attribute indicates if load balancing is enabled or disabled. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 41
0. This value is transmitted in the DTIM Period field of beacon frames. wlsrLMSAddress Syntax IpAddress Max-Access read-only Status current Description The IP Address of the local switch that the access point is connected to. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 42
The status of the WiFi Interface. wlsrAgeout Syntax Integer32 Max-Access read-only Status current Description The age-out value in seconds. wlsrMTU Syntax Integer (0..2347) Max-Access read-only Status current Description The MTU of the WiFi Interface. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 43
This attribute indicates the mode of the WiFi Interface. wlsrCardType Syntax Integer noCard(1) intersil(2) atherosA(3) atherosBG(4) atherosABG(5) ar5212A(10) ar5212BG(11) ar5212ABG(12) Max-Access read-only Status current Description Indicates the type of the radio card. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Japan Brazil Taiwan Czech Republic Korea South Africa China Argentina France Australia Singapore Chile wlsrCountryCode Syntax DisplayString (Size(0..64)) Max-Access read-only Status current Description This object represents the configured country code. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 46
Syntax Integer32 Max-Access read-only Status current Description The number of stations using this channel. wlsrChStatsTotPkts Syntax Counter32 Max-Access read-only Status current Description The total packets observed on this channel. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 47
Description The total MAC errors packets observed on this channel. wlsrChStatsFrameErrorRate Syntax Integer32 Max-Access read-only Status current Description Frame errors as a percentage of total frames on this channel. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 48
Syntax Integer32 Max-Access read-only Status current Description Frame fragmentation rate in kbps. wlsrChStatsMonitoredTime Syntax TimeTicks Max-Access read-only Status current Description Time in ticks, since we have been observing this channel. | AP and AM AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19 wlsrChannelRateStatsEntry 19 wlsrChStatsTotBytesAt48Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20 wlsrChannelRateStatsEntry 20 wlsrChStatsTotPktsAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21 wlsrChannelRateStatsEntry 21 wlsrChStatsTotBytesAt54Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22 wlsrChannelRateStatsEntry 22 wlsrChannelRateStatsEntry Syntax wlsrChannelRateStatsEntry Max-Access not-accessible Status current Description Channel rate statistics. Index { wlsrChStatsChannel} AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 50
The total number of packets observed on this channel at 5 Mbps rate. wlsrChStatsTotBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 5 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 51
The total number of packets observed on this channel at 12 Mbps rate. wlsrChStatsTotBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 12 Mbps rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 52
The total number of packets observed on this channel at 36 Mbps rate. wlsrChStatsTotBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this channel at 36 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Object ID wlsrChannelDATypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1 wlsrChannelDATypeStatsTable 1 wlsrChStatsTotDABroadcastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1 wlsrChannelDATypeStatsEntry 1 wlsrChStatsTotDABroadcastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2 wlsrChannelDATypeStatsEntry 2 wlsrChStatsTotDAMulticastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3 wlsrChannelDATypeStatsEntry 3 wlsrChStatsTotDAMulticastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4 wlsrChannelDATypeStatsEntry 4 wlsrChStatsTotDAUnicastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5 wlsrChannelDATypeStatsEntry 5 wlsrChStatsTotDAUnicastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6 wlsrChannelDATypeStatsEntry 6 AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 54
Description The total number of multicast bytes observed on this channel. wlsrChStatsTotDAUnicastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of unicast packets observed on this channel. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Status current Description Channel statistics based on frame type. Index { wlsrChStatsChannel} wlsrChStatsTotMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The total number of management packets observed on this channel. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 56
Description The total number of data packets observed on this channel. wlsrChStatsTotDataBytes Syntax Counter32 Max-Access read-only Status current Description The total number of data bytes observed on this channel. | AP and AM AOS-W 3.4 MIB | Reference Guide...
The total number of packets that were less than 64 bytes long. wlsrChStatsPkts64To127 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 64 and 127 bytes long. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Object ID wlsrStaStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1 wlsrStaStatsTable 1 wlsrStaAddress 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1 wlsrStaStatsEntry 1 wlsrStaTxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2 wlsrStaStatsEntry 2 wlsrStaTxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3 wlsrStaStatsEntry 3 wlsrStaRxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 wlsrStaStatsEntry 4 wlsrStaRxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 wlsrStaStatsEntry 5 wlsrStaTxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 wlsrStaStatsEntry 6 | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 59
Max-Access not-accessible Status current Description Station statistics. Index { wlsrStaAddress} wlsrStaAddress Syntax MacAddress Max-Access not-accessible Status current Description The MAC Address of the station connected to this access point. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 60
Syntax Counter32 Max-Access read-only Status current Description The retry packets transmitted by the station wlsrStaRxRetryPkts Syntax Counter32 Max-Access read-only Status current Description The retry packets received from the station. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 61
Max-Access read-only Status current Description The total signal packets transmitted by this station. wlsrStaTxCurSignal Syntax Integer32 Max-Access read-only Status current Description This attribute indicate the station’s current transmit signal strength. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 62
Syntax Integer32 Max-Access read-only Status deprecated Description Current noise. wlsrStaRxHighNoise Syntax Integer32 Max-Access read-only Status deprecated Description High noise. wlsrStaRxLowNoise Syntax Integer32 Max-Access read-only Status deprecated Description Low noise. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 63
Station frame retry error rate in kbps. wlsrStaFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description Station frame bandwidth rate in kbps. wlsrStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description Station frame fragmentation rate in kbps. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 65
Status current Description Station rate statistics table. Index { wlsrStaAddress} wlsrStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 1 Mbps rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 66
The number of octets transmitted by the station at 5 Mbps rate. wlsrStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 11 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 67
The number of octets transmitted by the station at 12 Mbps rate. wlsrStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 18 Mbps rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 68
The number of octets transmitted by the station at 36 Mbps rate. wlsrStaTxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 48 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 69
The number of octets received by the station at 1 Mbps rate. wlsrStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 2 Mbps rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 70
The number of octets received by the station at 11 Mbps rate. wlsrStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 6 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 71
The number of octets received by the station at 18 Mbps rate. wlsrStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 24 Mbps rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 72
The number of octets received by the station at 48 Mbps rate. wlsrStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 54 Mbps rate. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Status current Description Station statistics based on the destination address. Index { wlsrStaAddress} wlsrStaTxDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 74
Status current Description The total of unicast packets transmitted by this station. wlsrStaTxDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total of unicast bytes transmitted by this station. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Syntax wlsrStaFrameTypeStatsEntry Max-Access not-accessible Status current Description Station frame type statistics entry. Index { wlsrStaAddress} wlsrStaTxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted management packets from a station. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 76
Max-Access read-only Status current Description The transmitted data bytes observed on this channel. wlsrStaRxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The number of received management packets at a station. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 77
Status current Description The number of received data packets at a station. wlsrStaRxDataBytes Syntax Counter32 Max-Access read-only Status current Description The number of received data bytes at a station. AOS-W 3.4 MIB | Reference Guide AP and AM |...
The number of packets transmitted by the station that were less than 64 bytes long. wlsrStaTxPkts64To127 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 64 and 127 bytes long. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 79
The number of packets transmitted by the station that were between 1024 and 1518 bytes long. wlsrStaRxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were less than 64 bytes long. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 80
The number of packets received by the station that were between 512 and 1023 bytes long. wlsrStaRxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 1024 and 1518 bytes long. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Index { wlsrAmApBSSID} wlsrAmApBSSID Syntax MacAddress Max-Access not-accessible Status current Description BSSID of the access point. wlsrAmSSID Syntax DisplayString(Size(0..62)) Max-Access read-only Status current Description The SSID of the access point. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 82
Max-Access read-only Status current Description The type of the access point. wlsrAmRSSI Syntax Integer32 Max-Access read-only Status current Description The access point receiver signal strength. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 84
If an access point is sending the trap, it will point to itself. wlsrSourceMac Syntax MacAddress Max-Access read-only Status current Description This object is used in the traps to indicate the MAC address of the source. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 85
This object is used in the traps to indicate the address type. wlsrSignatureName Syntax Octet String (Size (0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate the signature name. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 86
This object is used in the traps to indicate the signal strength indicator. wlsrRogueInfoURL Syntax DisplayString(Size(0..256)) Max-Access read-only Status current Description This object is used to point to the WEBGUI rogue access point information URL. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 88
The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp. wlsrStaImpersonation Objects {wlsrNodeMac, wlsrLocation} Status current Description This trap indicates that an AM at location wlsrLocation detected a station impersonation. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 89
This trap indicates that an Access Point has a bad short preamble configuration. wlsrWPAMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an Access Point has bad WPA configuration. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 90
This trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel. wlsrAPInterferenceDetected Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 91
Objects {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the low speed rate. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 92
This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for frame error rate. wlsrSignatureMatch Objects {wlsrSignatureName, wlsrSourceMac, wlsrRSSI, wlsrLocation} Status current Description This trap indicates that a signature match was detected. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 93
The acceptable sequence number difference is an IDS Configuration object. wlsrDisconnectStationAttack Objects {wlsrFrameType, wlsrSourceMac, wlsrRSSI, wlsrLocation} Status current Description This trap indicates that an AP/AM detected a station disconnect attack. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 94
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled load balancing. wlsrWEPMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status current Description This trap indicates that an Access Point has a bad WEP configuration. | AP and AM AOS-W 3.4 MIB | Reference Guide...
Page 95
Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel, wlsrInterferingAPInfoURL} Status current Description This trap indicates that an Interfering Access Point is detected by an air monitor located at wlsrLocation on channel wlsrCurrentChannel. AOS-W 3.4 MIB | Reference Guide AP and AM |...
Page 96
| AP and AM AOS-W 3.4 MIB | Reference Guide...
Authentication 1.3.6.1.4.1.14823.2.2.1.8 1.3.6.1.4.1.14823.2.2.1.8.1 wlsx Authentication Server Group wlsx Authentication Table 1.3.6.1.4.1.14823.2.2.1.8.1.1 wlsx Portal Server Table 1.3.6.1.4.1.14823.2.2.1.8.1.2 wlsx Ldap Server State Table 1.3.6.1.4.1.14823.2.2.1.8.1.5 wlsx Authentication Info Group 1.3.6.1.4.1.14823.2.2.1.8.2 wlsx Authentication Group 1.3.6.1.4.1.14823.2.2.1.8.3 AOS-W 3.4 MIB | Reference Guide Authentication |...
Page 99
The IP address of the authentication server. authServerPort Syntax Integer32 Max-Access read-create Status current Description The transport layer port of the authentication server. authServerRetryCount Syntax Integer32 Max-Access read-create Status current Description The configured retry count. AOS-W 3.4 MIB | Reference Guide Authentication |...
Page 100
Syntax Counter32 Max-Access read-only Status current Description The number of times this server was queried. authServerSuccessfullAuths Syntax Counter32 Max-Access read-only Status current Description The number of times this server responded with success. | Authentication AOS-W 3.4 MIB | Reference Guide...
The time since the server went into service with the switch. wlsxPortalServerTable The objects of the wlsx Portal Server table provide information about configured captive portal servers Table 24 wlsxPortalServerTable OIDs Object Object ID wlsxPortalServerEntry 1.3.6.1.4.1.14823.2.2.1.8.1.2.1 wlsxPortalServerTable 1 AOS-W 3.4 MIB | Reference Guide Authentication |...
Portal server index. portalServerHost Syntax DisplayString(SIZE(0..256)) Max-Access read-only Status current Description The IP address of the portal server. portalServerPort Syntax Integer32 Max-Access read-only Status current Description The transport layer port of the portal server. | Authentication AOS-W 3.4 MIB | Reference Guide...
Syntax wlsxLdapServerStateEntry Max-Access not-accessible Status current Description LDAP Server Entry. Index { authServerName } ldapInitDone Syntax TruthValue Max-Access read-only Status current Description Indicates whether the switch is initialized with the server. AOS-W 3.4 MIB | Reference Guide Authentication |...
Page 104
Status current Description Indicates whether the switch is bound to the server. ldapReBindCount Syntax Counter32 Max-Access read-only Status current Description The number of times that the switch is rebound with the server. | Authentication AOS-W 3.4 MIB | Reference Guide...
The CTS MIB contains the following table. Its objects are described in the following sections. Table 26 CTS MIB Tables Table Description wlsxCtsRequestTable The objects are used for the data synchronization event with MMS. AOS-W 3.4 MIB | Reference Guide Controller Transport Service |...
CTS transport index. History Added in AOS-W 3.1.0.3. Updated in AOS-W 3.2.0.0.—Syntax wlsxCtsOpcode Syntax DisplayString Max-Access read-write Status current Description Cookie for the config sync operation. History Added in AOS-W 3.1.0.3. | Controller Transport Service AOS-W 3.4 MIB | Reference Guide...
Page 107
Description Operational flags to be sent via CTS. History Added in AOS-W 3.1.0.3. wlsxCtsStatus Syntax Row Status Max-Access read-write Status current Description CTS row status. History Added in AOS-W 3.1.0.3. AOS-W 3.4 MIB | Reference Guide Controller Transport Service |...
Page 108
| Controller Transport Service AOS-W 3.4 MIB | Reference Guide...
External Services Interface The External Services Interface (ESI) module provides information about the Wireless Management System (WMS) in the Alcatel-Lucent switch. ESI is used for redirecting traffic to a virus scanner, context filter, or other third party network appliances. Figure 8 shows the architecture of the ESI MIB relative to 1.3.6.1.4.1.14823...
Status current Description The name of the ESI Server. esiServerGroup Syntax DisplayString Max-Access read-only Status current Description The name of the ESI server group to which this server belongs. | External Services Interface AOS-W 3.4 MIB | Reference Guide...
Page 111
Description The port number of the trusted interface for this server. esiServerUntrustedSlot Syntax Integer32 Max-Access read-only Status current Description The slot number of the untrusted interface for this server. AOS-W 3.4 MIB | Reference Guide External Services Interface |...
Page 112
Max-Access read-only Status current Description The port number of the untrusted interface for this server. esiServerStatus Syntax ArubaESIServerStatus Max-Access read-only Status current Description Indicates the status of this ESI server. | External Services Interface AOS-W 3.4 MIB | Reference Guide...
Chapter 7 IF External IF External (IF EXT) MIB objects provide system-level information about the Alcatel-Lucent switch— physical ports, configured VLANs, the port memberships, and the interfaces that define the VLANs. Figure 9 shows the architecture of the IF EXT MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba).
Status current Description This is the if Index in the ifTable, representing this slot and port. ifExtAdminState Syntax ArubaEnableValue Max-Access read-write Status current Description The desired state of the interface. AOS-W 3.4 MIB | Reference Guide IF External |...
Page 116
Status current Description Current Dot1d state of the Port. ifExtMode Syntax ArubaPortMode Max-Access read-write Status current Description This object indicates if the port is in a trunk mode or access mode. | IF External AOS-W 3.4 MIB | Reference Guide...
Page 117
Syntax DisplayString(SIZE(0..64)) Max-Access read-write Status current Description This object represents the ingress ACL name applied to the port. An empty string indicates that ACL is not applied on this port. AOS-W 3.4 MIB | Reference Guide IF External |...
Page 118
TruthValue Max-Access read-write Status current Description This object indicates if the port is used as a MUX Port. ifExtUserSlotNumber Syntax Integer32 Max-Access read-only Status current Description The user-visible (zero-based) slot number. | IF External AOS-W 3.4 MIB | Reference Guide...
Page 119
Description The duplex state of the port. ifExtPortType Syntax ArubaPortType Max-Access read-only Status current Description The type of the port. ifExtDescr Syntax DisplayString Max-Access read-only Status current Description Port description. AOS-W 3.4 MIB | Reference Guide IF External |...
This object represents the VLAN ID of the interface. ifExtVLANName Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description Name of the VLAN. ifExtVLANStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify the row. | IF External AOS-W 3.4 MIB | Reference Guide...
The slot index of the slot referred to by this row (1-based). ifExtVLANMemberPort Syntax Integer32 Max-Access read-only Status current Description The slot index of the slot referred to by this row (1-based). AOS-W 3.4 MIB | Reference Guide IF External |...
10 ifExtVlanInterfaceIpNatInside 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.11 wlsxIfExtVLANInterfaceEntry 11 ifExtVlanInterfaceIpIgmpSnooping 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.12 wlsxIfExtVLANInterfaceEntry 12 wlsxIfExtVLANInterfaceEntry Syntax wlsxIfExtVLANInterfaceEntry Max-Access not-accessible Status current Description An entry for one processor contained by the switch. Index { ifExtVLANId } | IF External AOS-W 3.4 MIB | Reference Guide...
Max-Access read-create Status current Description This object indicates the IP address of the interface. ifExtVLANInterfaceIpAddress Syntax IpAddress Max-Access read-create Status current Description This object indicates the IP address of the interface. AOS-W 3.4 MIB | Reference Guide IF External |...
Page 124
History Added in AOS-W 3.2.0.0. ifExtVlanInterfaceIpNatInside Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the IP not inside is set on the interface. History Added in AOS-W 3.2.0.0. | IF External AOS-W 3.4 MIB | Reference Guide...
Page 125
Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the IP IGMP snooping is set on the interface. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide IF External |...
Chapter 8 Mesh The Mesh module provides information about Mesh portal and topology in the Alcatel-Lucent switch. Mesh is a new addition to the Aruba MIB family. Figure 10 shows the architecture of the Mesh MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Mesh MIBs are listed in the file aruba-mesh.my.
1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.9 wlsxMeshNodeEntry 9 wlsxMeshNodeEntry Syntax MeshEntry Max-Access not-accessible Status current Description Mesh node entry. Index {wlanAPMacAddress} wlsxMeshRole Syntax ArubaMeshRole MAX-ACCES read-only Status current Description Mesh role. History Added in AOS-W 3.2.0.0. | Mesh AOS-W 3.4 MIB | Reference Guide...
Page 129
ArubaPhyType Max-Access read-only Status current Description Mesh node RF band. History Added in AOS-W 3.2.0.0. wlsxMeshNodePathCost Syntax Integer32 Max-Access read-only Status current Description Mesh topology path cost. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Mesh |...
Page 130
Integer32 Max-Access read-only Status current Description Mesh topology link cost. History Added in AOS-W 3.2.0.0. wlsxMeshNodeHopCount Syntax Integer32 Max-Access read-only Status current Description Mesh topology hop cost. History Added in AOS-W 3.2.0.0. | Mesh AOS-W 3.4 MIB | Reference Guide...
Chapter 9 Mobility The Mobility module provides information about the mobility subsystem in the Alcatel-Lucent switch, such as the home agent (HA) or foreign agent (FA) of a roaming agent. Figure 11 shows the architecture of the Mobility MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba).
The objects of the wlsx Mobility Home Agent table list all home agents that are visible to the switch. Table 39 wlsxMobilityHomeAgentTable OIDs Object Object ID wlsxMobilityHomeAgentEntry 1.3.6.1.4.1.14823.2.2.1.9.1.3.1 wlsxMobilityHomeAgentTable 1 mobilityHomeAgentSubnet 1.3.6.1.4.1.14823.2.2.1.9.1.3.1.1 wlsxMobilityHomeAgentEntry 1 mobilityHomeAgentMask 1.3.6.1.4.1.14823.2.2.1.9.1.3.1.2 wlsxMobilityHomeAgentEntry 2 mobilityHomeAgentIp 1.3.6.1.4.1.14823.2.2.1.9.1.3.1.3 wlsxMobilityHomeAgentEntry 3 mobilityHomeAgentVLAN 1.3.6.1.4.1.14823.2.2.1.9.1.3.1.4 wlsxMobilityHomeAgentEntry 4 AOS-W 3.4 MIB | Reference Guide Mobility |...
Page 134
Subnet mask of the home agent. mobilityHomeAgentIp Syntax IpAddress Max-Access not-accessible Status current Description IP address of the home agent. mobilityHomeAgentVLAN Syntax Integer32 Max-Access read-only Status current Description VLAN of the home agent. | Mobility AOS-W 3.4 MIB | Reference Guide...
Index { mobilityHostMac } mobilityHostMac Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the mobile host. mobilityHostIp Syntax IpAddress Max-Access read-only Status current Description IP address of the mobile host. AOS-W 3.4 MIB | Reference Guide Mobility |...
Page 136
Home network of the mobile host. mobilityHostHomeMask Syntax IpAddress Max-Access read-only Status current Description Home network mask of the mobile host. mobilityHostDhcpInfo Syntax DisplayString Max-Access read-only Status current Description DHCP details of the mobile host. | Mobility AOS-W 3.4 MIB | Reference Guide...
Description The number of packets the proxy state machine processed. mobilityProxyPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of packets the proxy state machine forwarded back to data path. AOS-W 3.4 MIB | Reference Guide Mobility |...
Page 138
Counter32 Max-Access read-only Status current Description The number of times mobility detected client IP change. mobilityProxyClientEssidChg Syntax Counter32 Max-Access read-only Status current Description The number of times mobility detected client ESSID change. | Mobility AOS-W 3.4 MIB | Reference Guide...
The number of DHCP Bootp messages received. mobilityProxyDhcpPktProc Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages processed. mobilityProxyDhcpPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages forwarded. AOS-W 3.4 MIB | Reference Guide Mobility |...
Page 140
Status current Description The number of DHCP-requested IP for which home VLAN does not exist. mobilityProxyDHCPUnexpFrame Syntax Counter32 Max-Access read-only Status current Description The number of unexpected DHCP frames received from client. | Mobility AOS-W 3.4 MIB | Reference Guide...
Syntax Counter32 Max-Access read-only Status current Description The number of registration requests received by HA. mobilityHASentRRP Syntax Counter32 Max-Access read-only Status current Description The number of registration requests reply sent by HA. AOS-W 3.4 MIB | Reference Guide Mobility |...
Page 142
Status current Description The number of registration requests denied due to lack of resources by HA. mobilityHAMNauthFail Syntax Counter32 Max-Access read-only Status current Description The number of times MN-HA authentication failed. | Mobility AOS-W 3.4 MIB | Reference Guide...
Page 143
Max-Access read-only Status current Description The number of registration requests rejected due to too many bindings at HA. mobilityHABndExpire Syntax Counter32 Max-Access read-only Status current Description The number of times binding expired. AOS-W 3.4 MIB | Reference Guide Mobility |...
Syntax Counter32 Max-Access read-only Status current Description The number of registration request replies received by FA. mobilityFARRQAccept Syntax Counter32 Max-Access read-only Status current Description The number of registration requests accepted by HA. | Mobility AOS-W 3.4 MIB | Reference Guide...
Page 145
The number of mobile IP messages rejected by FA due to bad identification. mobilityFAMalfor Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by FA because they are poorly formed. AOS-W 3.4 MIB | Reference Guide Mobility |...
Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests received. mobilitySentRRVAck Syntax Counter32 Max-Access read-only Status current Description The number of received registration revocation request ACKs sent. | Mobility AOS-W 3.4 MIB | Reference Guide...
Page 147
Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests ignored. mobilityRRVAckIgnore Syntax Counter32 Max-Access read-only Status current Description The number of registrations that revocation ACK ignored. AOS-W 3.4 MIB | Reference Guide Mobility |...
Monitor MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Monitor MIBs are listed in the file aruba-mon.my. For information about downloading Aruba MIB files, see Downloading MIB Files on page AOS-W 3.4 MIB | Reference Guide Monitor |...
Mon E vent C ount Table 1.3.6.1.4.1.14823.2.2.1.6.6.2.7 wlsx Mon AP HT R ate S tats Table 1.3.6.1.4.1.14823.2.2.1.6.7 wlsx Mon Info Group 1.3.6.1.4.1.14823.2.2.1.6.7.1 wlsx Mon Access P oint Info G roup wls x Mon AP Info Table 1.3.6.1.4.1.14823.2.2.1.6.7.1.1 | Monitor AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx Mon AP Statistics table provide the statistics of all the APs that are monitored by the switch. Table 47 wlsxMonApStatsTable OIDs Object Object ID wlsxMonAPStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1 wlsxMonAPStatsTable 1 monPhyAddress 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.1 wlsxMonAPStatsEntry 1 monRadioNumber 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.2 wlsxMonAPStatsEntry 2 monitoredApBSSID 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.3 wlsxMonAPStatsEntry 3 monPhyType 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.4 wlsxMonAPStatsEntry 4 AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 152
Monitored Access Point Stats entry. Index { monPhyAddress, monRadioNumber, monitoredApBSSID } History Update in AOS-W 3.1—description. monPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the air monitor that is monitoring the AP. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 153
The number of clients associated to this monitored access point. monAPTxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by this monitored access point. History Update in AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 154
The number of deauthentications transmitted by this monitored access point. History Update in AOS-W 3.1—description. monAPRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications received by this monitored access point. History Update in AOS-W 3.1—description. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 155
Update in AOS-W 3.1—description. monAPFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this monitored access point. History Update in AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 156
Description ESSID of the monitored access point. History Update in AOS-W 3.1—description. monAPRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored access point. History Update in AOS-W 3.1—description. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 158
This attribute indicates the total number of bytes observed from this BSSID at 1 Mbps rate. monAPStatsTotPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 2 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 159
This attribute indicates the total number of packets observed from this BSSID at 11 Mbps rate. monAPStatsTotBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 11 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 160
This attribute indicates the total number of bytes observed from this BSSID at 12 Mbps rate. monAPStatsTotPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 18 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 161
This attribute indicates the total number of packets observed from this BSSID at 36 Mbps rate. monAPStatsTotBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 36 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 162
This attribute indicates the total number of bytes observed from this BSSID at 54 Mbps rate. monAPStatsTotPktsAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 9 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.2.1.6.6.1.3.1.13 wlsxMonAPDATypeStatsEntry 13 wlsxMonAPDATypeStatsEntry Syntax wlsxMonAPDATypeStatsEntry Max-Access not-accessible Status current Description Destination address-based packet and byte count entry for a monitored access point Index { monPhyAddress, monRadioNumber, monitoredApBSSID, monAPStatsTotDAUnicastPktsCounter32, monAPStatsTotDAUnicastBytesCounter32 } AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 164
This attribute indicates the total number of multicast bytes observed from this BSSID. monAPStatsTotDAUnicastPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of unicast packets observed from this BSSID. | Monitor AOS-W 3.4 MIB | Reference Guide...
This attribute indicates the total number of management bytes observed from this BSSID. monAPStatsTotCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of control packets observed from this BSSID. AOS-W 3.4 MIB | Reference Guide Monitor |...
Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were less than 64 bytes long. History Updated in AOS-W 3.1—description. | Monitor AOS-W 3.4 MIB | Reference Guide...
1024 and 1518 bytes long. wlsxMonAPHTRateStatsTable The objects of thewlsx Mon AP HPT Rate Stats table provide the monitored counts of access point packet and byte counts that are sorted by high throughput (HT) rates. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 168
" ::= { wlsxMonAPHTRateStatsEntry 1 } monAPStatsTotHTPkts OBJECT-TYPE SyntaxCounter32 Max-Accessread-only Statuscurrent DESCRIPTION " The total number of packets processed at the indicated rate " ::= { wlsxMonAPHTRateStatsEntry 2 } monAPStatsTotHTBytes OBJECT-TYPE SyntaxCounter32 | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 170
MAC address of the monitored station. monStaChannelNum Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using. monStaTxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by this station. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 171
Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station. monStaTxMCastPkts Syntax Counter32 Max-Access read-only Status current Description The number of multicast packets transmitted by this station. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 172
Counter32 Max-Access read-only Status current Description The number of authentication requests transmitted by this station monStaTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames transmitted by this station. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 173
The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. monStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this station. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 174
ESSID of the monitored station. monStaPhyType Syntax ArubaPhyType Max-Access read-only Status current Description PHY type of the monitored station. monStaRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 176
1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.47 wlsxMonStaRateStatsEntry 47 monStaRxBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.48 wlsxMonStaRateStatsEntry 48 wlsxMonStaRateStatsEntry Syntax wlsxMonStaRateStatsEntry Max-Access not-accessible Status current Description Data rate-based packet and byte count entry for a monitored station. Index { monPhyAddress, monRadioNumber, monitoredStaPhyAddress } | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 177
This attribute indicates the number of octets transmitted by the station at 2 Mbps rate. monStaTxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 5 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 178
This attribute indicates the number of packets transmitted by the station at 6 Mbps rate. monStaTxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 6 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 179
This attribute indicates the number of octets transmitted by the station at 18 Mbps rate. monStaTxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 24 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 180
This attribute indicates the number of packets transmitted by the station at 48 Mbps rate. monStaTxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 48 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 181
This attribute indicates the number of octets received by the station at 1 Mbps rate. monStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 2 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 182
This attribute indicates the number of packets received by the station at 11 Mbps rate. monStaRxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 11 Mbps rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 183
This attribute indicates the number of octets received by the station at 12 Mbps rate. monStaRxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 18 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 184
This attribute indicates the number of packets received by the station at 36 Mpbs rate. monStaRxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 36 Mpbs rate. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 185
This attribute indicates the number of octets received by the station at 54 Mbps rate. monStaTxPktsAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 9 Mbps rate. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 187
This attribute indicates the number of multicast packets transmitted by this station. monStaTxDAMulticastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of multicast bytes transmitted by this station. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 189
Status current Description This attribute indicates the transmitted control bytes from a station. monStaTxDataPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted data packets from a station. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 190
This attribute indicates the number of received control bytes at a station. monStaRxDataPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received data packets at a station. | Monitor AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.10 wlsxMonStaPktSizeStatsEntry10 monStaRxPkts512To1023 1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.11 wlsxMonStaPktSizeStatsEntry11 monStaRxPkts1024To1518 1.3.6.1.4.1.14823.2.2.1.6.6.2.5.1.12 wlsxMonStaPktSizeStatsEntry12 wlsxMonStaPktSizeStatsEntry Syntax wlsxMonStaPktSizeStatsEntry Max-Access not-accessible Status current Description Packet size-based packet count entry for a monitored station. Index { monPhyAddress, monRadioNumber, monitoredStaPhyAddress } AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 192
256 and 511 bytes long. monStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 193
128 and 255 bytes long. monStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were between 256 and 511 bytes long. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 195
Channel the monitored access point is using. monAPInfoClassification Syntax ArubaRogueApType Max-Access read-only Status current Description This attribute indicates the type of the access point. monAPInfoESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the monitored access point. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 196
The number of signal packets observed by the monitoring access point during this sample time. monAPInfoSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which SNR data was collected. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 197
+1 or -1 MAC match. History Added in AOS-W 3.1.0.0. monAPInfoHTMode Syntax ArubaHTMode Max-Access read-only Status current Description Indicates the HT mode of the monitored AP, if any. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide Monitor |...
Status current Description Station entry information. Index { monPhyAddress, monRadioNumber, monitoredStaPhyAddress } monStaInfoChannelNummonStaInfoBSSID Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using. History Updated in AOS-W 3.1—description. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 199
Updated in AOS-W 3.1—description. monStaInfoRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. History Updated in AOS-W 3.1—description. monStaInfoClassification Syntax ArubaStationType Max-Access read-only Status current Description Classification of the monitored station. AOS-W 3.4 MIB | Reference Guide Monitor |...
Page 200
Status current Description The sample time in which SNR data was collected. monStaInfoStatus Syntax Integer up(1) down(2) Max-Access read-only Status current Description Indicates whether this station is considered up or down. | Monitor AOS-W 3.4 MIB | Reference Guide...
Max-Access not-accessible Status current Description Event count entry. Index { monEventID } History Added in AOS-W 3.1.0.0. monEventID Syntax Unsigned32 Max-Access read-only Status current Description Event ID. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Monitor |...
{ monPhyAddress, monRadioNumber, monitoredStaPhyAddress, monHTRate } History Added in AOS-W 3.3.0.0. monStaTxHTPkts Syntax Counter32 Max-Access read-only Status current Description The total number of packets transmitted at the indicated rate. History Added in AOS-W 3.3.0.0. | Monitor AOS-W 3.4 MIB | Reference Guide...
Page 203
The total number of packets received at the indicated rate. History Added in AOS-W 3.3.0.0. monStaRxHTBytes Syntax Counter32 Max-Access read-only Status current Description The total number of bytes received at the indicated rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide Monitor |...
Description Station management entry. Index {monPhyAddress, monRadioNumber, monitoredApBSSID} apSnrAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time. | Signal Noise Ratio AOS-W 3.4 MIB | Reference Guide...
Page 207
The lowest signal strength observed by the monitoring station during this sample time. apSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. AOS-W 3.4 MIB | Reference Guide Signal Noise Ratio |...
The total signal strength observed by the monitoring station during this sample time. staSnrSignalPkts Syntax Integer32 Max-Access read-only Status current Description The number of signal packets observed by the monitoring station during this sample time. | Signal Noise Ratio AOS-W 3.4 MIB | Reference Guide...
Page 210
The highest signal strength observed by the monitoring station during this sample time. apSnrBSSIDLowestRxSignalStrength Syntax Integer32 Max-Access read-only Status current Description The lowest signal strength observed by the monitoring station during this sample time. | Signal Noise Ratio AOS-W 3.4 MIB | Reference Guide...
Description Station management entry. Index {monitoredStaPhyAddress, monPhyAddress, monRadioNumber} staSnrPhyAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time. AOS-W 3.4 MIB | Reference Guide Signal Noise Ratio |...
Page 212
The lowest signal strength observed by the monitoring station during this sample time. staSnrPhySampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. | Signal Noise Ratio AOS-W 3.4 MIB | Reference Guide...
Chapter 12 Switch The Switch module provides statistical information about Alcatel-Lucent switches, including storage and memory utilization, and the wireless stations associated with the access points. Figure 14 shows the architecture of the Switch MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Switch MIBs are listed in the file aruba-switch.my.
Page 215
Syntax Integer master(1) local(2) standbymaster(3) Max-Access read-only Status current Description Role of this switch in the switch domain. wlsxSwitchMasterIp Syntax IpAddress Max-Access read-only Status current Description Master IP of the switch AOS-W 3.4 MIB | Reference Guide Switch |...
Index { switchListSwitchIPAddress } switchListSwitchIPAddress Syntax IpAddress Max-Access not-accessible Status current Description P Address of the switch. switchListSwitchRole Syntax Integer master(1) local(2) standbymaster(3) Max-Access read-only Status current Description Role of the switch. | Switch AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 wlsxLicenseEntry 5 licenseService 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6 wlsxLicenseEntry 6 wlsxLicenseEntry Syntax LicenseEntry Max-Access not-accessible Status current Description License Entry. Index { licenseIndex } licenseIndex Syntax Integer32 Max-Access not-accessible Status current Description License ID number. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 218
Status current Description License flags E – enabled A – auto-generated R – reboot required to activate licenseService Syntax DisplayString Max-Access read-only Status current Description The service enabled by this license. | Switch AOS-W 3.4 MIB | Reference Guide...
Syntax Integer32 Max-Access not-accessible Status current Description Processor Index. History Added in AOS-W 2.3. sysXProcessorDescr Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Description of the processor. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide Switch |...
An entry for one long-term storage device contained by the switch. History Added in AOS-W 2.3. sysXStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description The storage index. History Added in AOS-W 2.3. | Switch AOS-W 3.4 MIB | Reference Guide...
Added in AOS-W 2.3. wlsxSysXMemoryTable The objects of the wlsx Sys XMemory table describes the memory utilization of the switch. Table 70 wlsxSysXMemoryTable OIDs Object Object ID wlsxSysXMemoryEntry 1.3.6.1.4.1.14823.2.2.1.1.1.11.1 wlsxSysXMemoryTable 1 ysysXMemoryIndex 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 wlsxSysXMemoryEntry 1 AOS-W 3.4 MIB | Reference Guide Switch |...
Page 222
Integer32 Max-Access read-only Status current Description Total memory in KB. History Added in AOS-W 2.3. sysXMemoryUsed Syntax Integer32 Max-Access read-only Status current Description Used memory in KB. History Added in AOS-W 2.3. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 224
Name of the user. userRole Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description The role configured for this user. userUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user was connected to the switch. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 225
Integer32 Max-Access read-only Status current Description VLAN on which the user is connected to the switch. userConnectedSlot Syntax Integer32 Max-Access read-only Status current Description Slot on switch where the user connection terminates. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 227
Physical Address of the station from which the user connected to the switch. History Added in AOS-W 3.3.0.0. user6Name Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the user. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 228
Added in AOS-W 3.3.0.0. user6Location Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Location of the access point (in Building.Floor..format), which the user used to connect to the switch. History Added in AOS-W 3.3.0.0. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 229
Port on switch, where the user connection terminates. History Added in AOS-W 3.3.0.0. user6BWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the Bandwidth Contract applied to this user. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide Switch |...
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6 wlsxSwitchStationMgmtEntry 6 staSignalToNoiseRatio 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 wlsxSwitchStationMgmtEntry 7 staTransmitRate 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8 wlsxSwitchStationMgmtEntry 8 staReceiveRate 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9 wlsxSwitchStationMgmtEntry 9 wlsxSwitchStationMgmtEntry Syntax MxSwitchStationMgmtEntry Max-Access not-accessible Status current Description Station management entry. Index { staPhyAddress, staAccessPointBSSID } | Switch AOS-W 3.4 MIB | Reference Guide...
Page 231
Syntax Unsigned32 Max-Access read-only Status current Description Association ID with which the station is associated with this system. staAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 232
The transmit rate of the channel. staReceiveRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description The receive rate of the channel. | Switch AOS-W 3.4 MIB | Reference Guide...
{ staPhyAddress, staAccessPointBSSID } staTxPackets Syntax Counter32 Max-Access read-only Status current Description Total packets transmitted by the station. staTxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes transmitted by the station. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 234
Description Station frame retry rate. staFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description Station frame low speed rate. staFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Station frame non-unicast packet rate. | Switch AOS-W 3.4 MIB | Reference Guide...
Syntax Unsigned32 Max-Access read-only Status current Description Total number of access points connected to this switch. wlsxSwitchTotalNumStationsAssociated Syntax Unsigned32 Max-Access read-only Status current Description Total number of stations associated to this switch. AOS-W 3.4 MIB | Reference Guide Switch |...
16 wlsxSwitchAccessPointEntry Syntax MxSwitchAccessPointEntry Max-Access not-accessible Status current Description Station management entry. Index { apBSSID } apBSSID Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the access point. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 237
Syntax IpAddress Max-Access read-only Status current Description Address of the access point. apPhyType Syntax Integer dot11a(1) dot11b(2) dot11g(3) Max-Access read-only Status current Description Physical layer protocol support of the access point. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 238
TimeTicks Max-Access read-only Status current Description Time since the access point was connected to the switch. apInactiveTime Syntax TimeTicks Max-Access read-only Status current Description Time since the access point has been inactive. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 239
Description SNR for the BSSID. apTransmitRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description Indicates transmit rate of the channel. AOS-W 3.4 MIB | Reference Guide Switch |...
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 wlsxSwitchGlobalAPEntry 4 globalAPdot11bPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 wlsxSwitchGlobalAPEntry 5 tvglobalAPState 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 wlsxSwitchGlobalAPEntry 6 globalAPdot11gPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7 wlsxSwitchGlobalAPEntry 7 wlsxSwitchGlobalAPEntry Syntax MxSwitchGlobalAPEntry Max-Access not-accessible Status current Description Station Management Entry. Index { globalAPLocation, globalAPAddress } | Switch AOS-W 3.4 MIB | Reference Guide...
Page 241
Syntax MacAddress Max-Access read-only Status current Description Physical MAC address of the module supporting dot11b in the access point. AP can have support for both dot11a and dot11b physical layer. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 243
Access point channel frame retry rate. apChannelFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame low speed rate. apChannelFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame non-unicast packet rate. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 244
Status current Description Total packets received by the access point on this BSSID. apBSSRxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes received by the access point on this BSSID. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 245
Frame non-unicast packet rate on this BSSID. apBSSFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description Frame fragmentation rate on this BSSID. apBSSFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description Frame receive error rate on this BSSID. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 247
This object is used in the traps to indicate the type of the voltage. wlsxVoltageValue Syntax DisplayString(Size(0..10)) Max-Access read-only Status current Description This object is used in the traps to indicate the voltage value in float. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 248
Status current Description The reason why a station is black listed. wlsxSpoofedIpAddress Syntax IpAddress Max-Access read-only Status current Description This object is used in a trap to identify a spoofed IP address. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 249
This object is used in a trap to identify name of the database user. wlsxDBIpAddress Syntax IpAddress Max-Access read-only Status current Description This object is used in a trap to identify the IP address of the DB. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 250
Max-Access read-only Status current Description This object represents the VRRP operational state. wlsxApTxPower Syntax Integer32 Max-Access read-only Status current Description This object contains the value of the AP transmit power. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 251
Integer32 Max-Access read-only Status current Description This object is used in the traps to indicate a line card in the switch.This value matches the value of sysExtCardSlot. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 253
{ userPhyAddress } Status current Description A trap which indicates that a new user is created. wlsxUserEntryDeleted Objects { userPhyAddress } Status current Description A trap which indicates that a user is deleted. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 254
Description A trap which indicates that the authentication server is up. wlsxAuthMaxUserEntries Status current Description A trap which indicates that the user entries table is full and cannot add any more entries. | Switch AOS-W 3.4 MIB | Reference Guide...
Description A trap which indicates that the temperature is out of bounds. wlsxLCInserted Objects { wlsxLineCardNumber, wlsxSlotNumber } Status current Description A trap which indicates that a line card is inserted. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 256
A trap which indicates that the system free memory is low. wlsxFanTrayRemoved Status current Description A trap which indicates that the fan tray is removed. wlsxLCRemoved Status current Description A trap which indicates that the fan tray is removed. | Switch AOS-W 3.4 MIB | Reference Guide...
Page 257
Objects { apLocation, apIpAddress, apCurrentChannel } Status deprecated Description A trap which indicates that an access point at location apLocation and address apIpAddress has changed the channel to apCurrentChannel. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 258
{ apLocation, apIpAddress, apCurrentChannel, wlsxApTxPower } Status current Description A trap which indicates changes in the radio attributes of an access point at location apLocation and address ap IpAddress. Ap channel is apCurrentChannel Transmit power is apTxPower | Switch AOS-W 3.4 MIB | Reference Guide...
A trap which indicates that a user is deleted. History Added in AOS-W 3.3.0.0. wlsxUser6EntryAuthenticated Objects { user6PhyAddress, user6Name, user6AuthenticationMethod, user6Role } Status current Description A trap which indicates that a user is Authenticated. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide Switch |...
Page 260
A trap which indicates that a user is Deauthenticated. History Added in AOS-W 3.3.0.0. wlsxUser6AuthenticationFailed Objects { user6PhyAddress } Status current Description A trap which indicates that a user authentication has failed. History Added in AOS-W 3.3.0.0. | Switch AOS-W 3.4 MIB | Reference Guide...
The table of all the fans in the switch. wlsxSysExtPowerSupplyTable The table of power supplies in the switch. wlsxSysExtSwitchListTable This table lists all the switches in the Alcatel-Lucent Domain. It is populated only on the master switch. Local switches return empty tables. wlsxSysExtSwitchLicenseTable This table lists all licenses installed on the switch.
Page 263
Model name of the switch. History Added in AOS-W 2.3. wlsxSysExtSwitchRole Syntax ArubaSwitchRole Max-Access read-only Status current Description Role of this switch in the Alcatel-Lucent Switch Domain. History Added in AOS-W 2.3. wlsxSysExtSwitchMasterIp Syntax IpAddress Max-Access read-only Status current Description Switch IP of the master switch.
Page 264
The license serial number of the switch. History Added in AOS-W 2.3. wlsxSysExtSwitchLicenseCount Syntax Integer32 Max-Access read-only Status current Description The number of licenses installed on the switch. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
Page 265
This object indicates whether the switch is configured to accept configuration snapshots from MMS. History Added in version 2.5 wlsxSysExtSwitchLastReload Syntax DisplayString(Size(0..128)) Max-Access read-only Status current Description The reason for the last switch reload. History Added in version 2.5 AOS-W 3.4 MIB | Reference Guide System External |...
Status An entry for one processor contained by the switch. Description History Added in AOS-W 2.3. sysExtProcessorID Syntax Integer32 Max-Access not-accessible Status current Description Processor index. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.2.1.2.1.14.1.4 wlsxSysExtStorageEntry 4 sysExtStorageName 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.5 wlsxSysExtStorageEntry 5 wlsxSysExtStorageEntry Syntax wlsxSysExtStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the switch. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide System External |...
Page 268
Status current Description Used storage in MB. History Added in AOS-W 2.3. sysExtStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Name of the storage file system. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
Max-Access not-accessible Status current Description Index of the table. History Added in AOS-W 2.3. sysExtMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide System External |...
Page 271
Number of data ports on the card. History Added in AOS-W 2.3. sysExtCardNumOfFastethernetPorts Syntax Integer32 Max-Access read-only Status current Description Number of fast ethernet ports on the card. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide System External |...
Page 272
Max-Access read-only Status current Description Card manufacturing date. History Added in AOS-W 2.3. sysExtCardHwRevision Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Hardware revision of the card. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx System External Fan table list the fans of the switch. Table 85 wlsxSysExtFanTable OID Object Object ID wlsxSysExtFanEntry 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanTable 1 sysExtFanIndex 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanEntry 1 sysExtFanStatus 1.3.6.1.4.1.14823.2.2.1.2.1.17.2 wlsxSysExtFanEntry 2 AOS-W 3.4 MIB | Reference Guide System External |...
The table of power supplies in the switch. History Added in AOS-W 2.3. Table 86 wlsxSysExtPowerSupplyTable Object Object ID wlsxSysExtPowerSupplyEntry 1.3.6.1.4.1.14823.2.2.1.2.1.18.1 wlsxSysExtPowerSupplyTable 1 sysExtPowerSupplyIndex 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.1 wlsxSysExtPowerSupplyEntry 1 sysExtPowerSupplyStatus 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.2 wlsxSysExtPowerSupplyEntry 2 | System External AOS-W 3.4 MIB | Reference Guide...
Sequence Of wlsxSysExtSwitchListEntry Max-Access not-accessible Status current Description This table will list all the switches in the Alcatel-Lucent Switch Domain. It will be populated only on the master switch. Local switches return empty table. Table 87 wlsxSysExtSwitchListTable OIDs Object Object ID wlsxSysExtSwitchListEntry 1.3.6.1.4.1.14823.2.2.1.2.1.19.1...
Page 276
Max-Access read-only Status current Description Role of the switch. History Added in AOS-W 2.3. sysExtSwitchLocation Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Location of the switch. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx External Switch License table list the valid licenses installed on the switch. Table 88 wlsxSysExtSwitchLicenseTable OIDs Object Object ID wlsxSysExtLicenseEntry 1.3.6.1.4.1.14823.2.2.1.2.1.20.1 wlsxSysExtSwitchLicenseTable 1 sysExtLicenseIndex 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.1 wlsxSysExtLicenseEntry 1 sysExtLicenseKey 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.2 wlsxSysExtLicenseEntry 2 AOS-W 3.4 MIB | Reference Guide System External |...
Page 278
Syntax DisplayString Max-Access read-only Status current Description License key. History Added in AOS-W 2.3. sysExtLicenseInstalled Syntax DisplayString Max-Access read-only Status current Description License installation time. History Added in AOS-W 2.3. | System External AOS-W 3.4 MIB | Reference Guide...
Page 280
Type of the storage. sysExtStorageSize Syntax Integer32 Max-Access read-only Status current Description Total size of the storage file system in MB. sysExtStorageUsed Syntax Integer32 Max-Access read-only Status current Description Used storage in MB. | System External AOS-W 3.4 MIB | Reference Guide...
An entry for one memory region on the switch. Currently, only the CP region is monitored. Index { sysExtMemoryIndex } sysExtMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. sysExtMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB. AOS-W 3.4 MIB | Reference Guide System External |...
1.3.6.1.4.1.14823.2.2.1.2.2. wlsxSystemExtTableGenNumberGroup 11 wlsxSysExtUserTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the user table was modified since reboot. History Added in version 3.1 | System External AOS-W 3.4 MIB | Reference Guide...
Page 283
Added in version 3.1. wlsxSysExtPortTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the port table was modified since reboot. History Added in version 3.1. AOS-W 3.4 MIB | Reference Guide System External |...
Page 284
Added in version 3.1. wlsxSysExtMonStationTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the monitored station table was modified since reboot. History Added in version 3.1 | System External AOS-W 3.4 MIB | Reference Guide...
ArubaUnprovisionedStatus ArubaACLAction ArubaVoipProtocolType ArubaMonitorMode ArubaDaysOfWeek ArubaAccessPointMode ArubaMeshRole ArubaAuthenticationMethods ArubaAuthServerType ArubaHTRate ArubaRogueApType ArubaAddressType ArubaStationType ArubaBlackListReason ArubaEnableValue Syntax Integer enable(1) disable(2) Status current Description Represents a flag which is either enabled or disabled. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 286
Represents the PHY of the access point. History Updated in AOS-W 3.1—syntax, wired(5) ArubaHTMode Syntax Integer none(1) ht20(2) ht40(3) Status current Description Represents the HT status of the access point or client. History Added in AOS-W 3.3.0.0. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 287
Represents if a feature is supported or unsupported. ArubaACLDomain Syntax Integer alias(1) any(2) user(3) host(4) network(5) Status current Description Represents both the source and destination to which an ACL rule will be applied. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 288
Status current Description Represents the actions in an ACL rule. ArubaDaysOfWeek Syntax Integer sun(1) mon(2) tue(3) wed(4) thu(5) fri(6) sat(7) Status current Description Represents the actions of an ACL rule. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 289
Status current Description Sub-authentication (e.g., EAP type). ArubaRogueApType Syntax Integer valid(1) interfering(2) unsecure(3) dos(4) unknown(5) knownInterfering(6) Status current Description Represents the rogue AP type. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 290
Updated in AOS-W 3.1—syntax items (10), (11), (12) ArubaHashAlgorithms Syntax Integer md5(1) sha(2) Status current Description Represents the actions in an ACL rule. ArubaVLANValidRange Syntax Integer(1..4095) Status current Description Represents the valid VLAN ID range. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 291
ArubaCardType Syntax Integer lc1(1) lc2(2) sc1(3) sc2(4) sw2400(5) sw800(6) sw200(7) m3mk1(8) sw3200(9) sw3400(10) sw3600(11) Status current Description Type of the hardware module. History Updated in AOS-W 3.1—syntax, addition of items (8)–(11) AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 292
Status current Description The type interface referred to by the value of ifIndex. ArubaVoipProtocolType Syntax Integer sccp(1) svp(2) vocera(3) sip(4) unknown(10) Status current Description The type of VoIP protocols supported. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 293
The mode of the access point. ArubaAddressType Syntax Integer srcAddress(1), dstAddress(2), bssid(3) Status current Description Address type. ArubaBlackListReason Syntax Integer userDefined(1) mitmAttack(2) authFailure(3) pingFlood(4) sessionFlood(5) synFlood(6) sessionBlacklist(7) ipSpoofing(8) other(100) Status current Description Black list reason. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 294
Represents operational state of an interface. ArubaAntennaSetting Syntax Integer notPresent(1) enabled(2) disabled(3) Syntax current Description Represents the status of the external antenna. ArubaAPStatus Syntax Integer up(1) down(2) Status current Description The status of the access point. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 295
History Update in AOS-W 3.2.0.0.—addition of item (3) in Syntax. ArubaEnet1Mode Syntax Integer activeStandby(1) tunnel(2 bridge(3) notApplicable(4) Status current Description Represents the mode of the Ethernet port on the access point. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 296
Integer success(1), error(2) Status current Description Configuration transfer types. History Added in AOS-W 3.1 ArubaConfigurationChangeType Syntax Integer create(1) delete(2) modify(3) Status current Description Configuration change types. History Added in AOS-W 3.1 | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 297
Status current Description VoIP protocol used. History Added in AOS-W 3.1 ArubaVoipRegState Syntax Integer unkown(0) registering(1) unregistering(2) challenge(3) registered(4) unregistered(5) Status current Description VoIP registered state. History Added in AOS-W 3.1 AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
Page 298
Status current Description Voice CAC bit flags. History Added in AOS-W 3.1 ArubaMeshRole Syntax Integer nonmesh(0) point(1) portal(2) Status current Description Mesh role. History Added in AOS-W 3.2.0.0. | Textual Conventions AOS-W 3.4 MIB | Reference Guide...
Page 299
Status current Description Represents HT rate. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Textual Conventions |...
83 (AP and wlsrTrapsGroup on page 87 (AP and wlsxSwitchTraps Group on page 246 (Switch) Switch Traps–Notifications on page 252 (Switch) Platform Traps on page 255 (Switch) IPv6 Authentication Traps on page 259 (Switch) AOS-W 3.4 MIB | Reference Guide Traps |...
Page 304
Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address of an access point for which we are raising the trap. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 305
This object is used in the traps to indicate the channel of the access point for which we are raising the trap. If an air monitor is sending the trap, this will indicate AP. If an access point is sending the trap, then it will point to itself. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 306
This object is used in the traps to indicate the MAC address of the transmitter. wlsxTrapSnr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the signal-to-noise ratio. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 307
This object is used in the traps to indicate the current channel. wlsxTrapAPTxPower Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the AP transmit power. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 308
This object is used in the traps to indicate the admin status of VLAN. wlsxTrapOperStatus Syntax ArubaOperStateValue Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the admin status of VLAN. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 309
This object is used in the traps to indicate the process name. wlsxTrapFanNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the fan number. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 310
This object is used in a trap to identify an old MAC address. wlsxTrapSpoofedNewPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a new MAC address. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 311
This object is used in a trap to identify the port of the user. wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier. wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 312
Status current Description This object represents the number of days remaining prior to a license expiry. wlsxTrapSwitchIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the switch IP address. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 313
DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the authentication method of the user. wlsxTrapUserAuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access accessible-for-notify Status current Description This object represents the authentication method of the user. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 314
This object is used in all the enterprise traps to indicate the time when the trap is generated on the switch. wlsxTrapHostIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the trap host. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 315
This object represents the transfer type, upload or download. History Added in AOS-W 3.1.0.0. wlsxTrapConfigurationState Syntax ArubaConfigurationState Max-Access accessible-for-notify Status current Description This object represents the state of the configuration transfer. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 316
Integer32 Max-Access accessible-for-notify Status current Description This object represents the generation number of a table. Used in the MMS to keep track of the table content changes. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 317
This object represents the number of CDRs in buffer. History Added in AOS-W 3.1.0.0. wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 318
This object represents the AP serial number. History Added in AOS-W 3.4. wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. History Added in AOS-W 3.4. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 323
1156 wlsxHtGreenfieldSupported 1.3.6.1.4.1.14823.2.3.1.11.1.2.1157 wlsxTrapDefinitionsGroup 1157 wlsxHT40MHzIntoleranceAP 1.3.6.1.4.1.14823.2.3.1.11.1.2.1158 wlsxTrapDefinitionsGroup 1158 wlsxHT40MHzIntoleranceSta 1.3.6.1.4.1.14823.2.3.1.11.1.2.1159 wlsxTrapDefinitionsGroup 1159 wlsxVLANLinkUp Objects { wlsxTrapVLANId, wlsxTrapAdminStatus, wlsxTrapOperStatus } Status current Description This trap indicates that a VLAN interface is up. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 324
This trap indicates that the system flash space is back to a sufficient level. wlsxMemoryUsageOK Status current Description This trap indicates that the free memory usage is back to a sufficient level. The system memory threshold is 5 MB. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 325
This trap indicates that the role of the switch IP address has changed in the domain. wlsxNUserEntryCreated Objects { wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress } Status current Description This trap indicates that a new user is created. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 326
This trap indicates that the authentication server request timed out. History Added in AOS-W 3.1.0.0. wlsxNAuthServerTimedOut Objects { wlsxTrapAuthServerName, wlsxTrapAuthServerTimeout } Status current Description This trap indicates that the authentication server timed out. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 327
This trap indicates the power supply has failed. History Added in AOS-W 3.1.0.0. wlsxNFanFailure Objects { wlsxTrapFanNumber } Status current Description This trap indicates that the fan has . History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 328
This trap indicates that a GBIC is inserted in a line card. History Added in AOS-W 3.1.0.0. wlsxNProcessDied Objects { wlsxTrapProcessName } Status current Description This trap indicates that a process has died. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 329
This trap indicates that a fan tray is inserted. History Added in AOS-W 3.1.0.0. wlsxNLCRemoved Objects { wlsxTrapCardSlot } Status current Description This trap indicates that a line card is removed. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 330
This trap indicates that an access point at location wlsxTrapAPLocation has changed the channel. History Added in AOS-W 3.1.0.0. wlsxNStationAddedToBlackList Objects { wlsxTrapNodeMac, wlsxTrapStationBlackListReason } Status current Description This trap indicates that the station is black listed. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 331
Description This trap indicates changes in the radio attributes of an access point. wlsxNESIServerUp Objects { wlsxTrapESIServerGrpName, wlsxTrapESIServerName, wlsxTrapESIServerIpAddress } Status current Description This trap indicates that a ESI server is up. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 332
This trap indicates that an air monitor detected station impersonation. wlsxReservedChannelViolation Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected an access point that is violating the reserved channel configuration. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 333
This trap indicates that an access point has bad short preamble configuration. wlsxWPAMisconfiguration Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an access point has bad WPA configuration. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 334
This trap indicates that an AP/AM detected a weak WEP-IV violation. wlsxChannelInterferenceDetected Objects { wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor has detected channel interference. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 335
{ wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor is reporting that an AP has exceeded an upper threshold for frame retry rate for AP. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 336
Objects { wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor is reporting that a station has exceeded the non-unicast traffic rate. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 337
This trap indicates that an air monitor is reporting that it exceeded an upper threshold for frame error rate. wlsxSignatureMatchAP Objects { wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that we detected a signature match from an AP. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 338
This trap indicates that the number of EAP handshake packets received by an air monitor exceeds the configured IDS EAP handshake rate. wlsxSignalAnomaly Objects { wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected a signal anomaly. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 339
Objects { wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an air monitor detected a wireless bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 340
This trap indicates that an air monitor detected a repeat WEP-IV violation for a station. wlsxStaWeakWEPIVViolation Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected a weak WEP-IV violation for a station. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 341
This trap indicates that an interfering access point is detected by an air monitor located at wlsrLocation on channel wlsrCurrentChannel. History Added in AOS-W 3.1.0.0. wlsxPortUp Objects { wlsxTrapCardSlot, wlsxTrapPortNumber, wlsxTrapAdminStatus, wlsxTrapOperStatus } Status current Description This trap indicates that a physical port is up. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 342
Status current Description This trap indicates that an air monitor detected station impersonation. wlsxInformQueueOverFlow Objects { wlsxTrapHostIp, wlsxTrapHostPort } Status current Description This trap indicates that an inform queue overflow condition occurred. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 343
This trap indicates the configuration update status. History Added in AOS-W 3.1.0.0. wlsxConfigurationUpdateSucceeded Objects { wlsxTrapTime, wlsxTrapConfigurationId } Status current Description This trap indicates the configuration update status. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 344
This trap indicates that the radio configuration has changed. History Added in AOS-W 3.1.0.0. wlsxAPEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the AP configuration has changed. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 345
{ wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor has detected a station that is bridging from a wireless History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 346
} Status current Description This trap indicates that the system detected a signature match for Netstumbler from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0025. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 347
} Status current Description This trap indicates that the system detected a signature match for AirJack from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0018 History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 348
} Status current Description This trap indicates that the system detected a signature match for Deauth- Broadcast from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0045 History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 349
} Status current Description This trap indicates that an air monitor has detected an ad hoc network that is bridging to a wired network. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 350
This trap indicates that a suspected unsecure access point is detected by a switch. The access point is suspected to be unsecure with the supplied confidence level, because it was matched to the wired MAC address or IP address. History Added in AOS-W 3.1.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
Page 351
This trap indicates that a tunnel interface is up. History Added in AOS-W 3.1.0.0. wlsxTunnelDown Objects { wlsxTrapTime, wlsxTrapTunnelId, wlsxTrapTunnelDownReason, wlsxTrapTunnelStatus } Status current Description This trap indicates that a tunnel interface is down. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide Traps |...
Page 352
Added in AOS-W 3.3.0.0. wlsxHT40MHzIntoleranceSta Objects { wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr, wlsxTrapAPChannel,wlsxTrapFrameType, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that the system detected a HT 40MHz Intolerance setting a Station. History Added in AOS-W 3.3.0.0. | Traps AOS-W 3.4 MIB | Reference Guide...
1.3.6.1.4.1.14823.2.2.1.4.1.4 wlsx User Stats Group The User MIB contains the following tables. Table 94 User MIB Tables Table Description wlsxTotalNumOfUsers This table lists the total number of users connected to the switch. AOS-W 3.4 MIB | Reference Guide User |...
Page 355
{ nUserPhyAddress, nUserIpAddress } History Added in AOS-W 2.3. nUserPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description Physical address of the station from which the user connected to the switch. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide User |...
Page 356
Time since the user connected to the switch. History Added in AOS-W 2.3. nUserAuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. History Added in AOS-W 2.3. | User AOS-W 3.4 MIB | Reference Guide...
Page 357
Added in AOS-W 2.3. Updated in AOS-W 3.2.0.0.—description. nUserApLocation Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Location of the access point with which the user used is associated. History Updated in AOS-W 3.2.0.0.—description. AOS-W 3.4 MIB | Reference Guide User |...
Page 358
Added in AOS-W 2.3. nUserMobilityStatus Syntax Integer visitor(1) away(2) associated(3) wired(4) Max-Access read-only Status current Description The mobility status of the user. History Added in AOS-W 2.3. Updated in AOS-W 3.1—addition of syntax item (4) | User AOS-W 3.4 MIB | Reference Guide...
Page 359
History Added in AOS-W 2.3. nUserBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status deprecated Description Name of the bandwidth contract applied to this user. History Added in AOS-W 2.3. Deprecated in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide User |...
Page 360
Description The VLAN to which the user is currently bound. nUserIsWired Syntax TruthValue Max-Access read-only Status current Description Indicates whether this is a wired or wireless user. History Added in AOS-W 2.3. | User AOS-W 3.4 MIB | Reference Guide...
Page 361
The name of the mobility domain to which the mobile user belongs. History Added in AOS-W 3.1 nUserUPBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the upstream bandwidth contract applied to this user. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide User |...
Page 362
Name of the downstream bandwidth contract applied to this user. History Added in AOS-W 3.2.0.0. nUserDNBWContractUsage Syntax Integer user(1) shared(2) Max-Access read-only Status current Description Indicates how the downstream bandwidth contract is used. History Added in AOS-W 3.2.0.0. | User AOS-W 3.4 MIB | Reference Guide...
Page 363
The HT mode of this user, if any. History Added in AOS-W 3.3.0.0. nUserEncryptionMethod Syntax ArubaEncryptionMethod Max-Access read-only Status current Description Provides encryption method information through SNMP. History Added in AOS-W 3.4 AOS-W 3.4 MIB | Reference Guide User |...
Added in AOS-W 3.1.0.0. wlsxUserSessionTimeCount Syntax Counter32 Max-Access read-only Status current Description Number of users that are connected to the ESSID whose sessions expired in this time interval. History Added in AOS-W 3.1.0.0. | User AOS-W 3.4 MIB | Reference Guide...
Status current Description The number of VPN users. History Added in AOS-W 3.4 wlsxNumOfUsersCP Syntax Unsigned32 Max-Access read-only Status current Description The number of Captive Portal users. History Added in AOS-W 3.4 AOS-W 3.4 MIB | Reference Guide User |...
Page 366
Status current Description The number of MAC users. History Added in AOS-W 3.4 wlsxNumOfUsersStateful8021x Syntax Unsigned32 Max-Access read-only Status current Description The number of stateful 802.1x users. History Added in AOS-W 3.4 | User AOS-W 3.4 MIB | Reference Guide...
This table lists the total number of users connected to the switch. wlsxUser6Table This table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their MAC address and IP address. AOS-W 3.4 MIB | Reference Guide User6 |...
Page 369
User Entry Index { nUser6PhyAddress, nUser6IpAddress } nUser6PhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the station from which the user connected to the switch. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide User6 |...
Page 370
Time since the user connected to the switch. History Added in AOS-W 3.3.0.0. nUser6AuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. History Added in AOS-W 3.3.0.0. | User6 AOS-W 3.4 MIB | Reference Guide...
Page 371
History Added in AOS-W 3.3.0.0. nUser6ApBSSID Syntax MacAddress Max-Access read-only Status current Description BSSID of the access point that the user used to connect to the switch. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide User6 |...
Page 372
Integer32 Max-Access read-only Status current Description Home VLAN of the User. If the user is on the home switch then this VLAN will be same as userDefaultVLAN. History Added in AOS-W 3.3.0.0. | User6 AOS-W 3.4 MIB | Reference Guide...
Page 373
Indicates how the Bandwidth Contract is used. History Added in AOS-W 3.3.0.0. nUser6BWContractId Syntax Integer32 Max-Access read-only Status deprecated Description Bandwidth Contract Id Assigned to the User History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide User6 |...
Page 374
The slot to which the user is connected, if wired. History Added in AOS-W 3.3.0.0. nUser6ConnectedPort Syntax Integer32 Max-Access read-only Status current Description The port to which the user is connected, if wired. History Added in AOS-W 3.3.0.0. | User6 AOS-W 3.4 MIB | Reference Guide...
Page 375
Indicates how the Upstream Bandwidth Contract is used. History Added in AOS-W 3.3.0.0. nUser6UPBWContractId Syntax Integer32 Max-Access read-only Status current Description Upstream Bandwidth Contract Id Assigned to the User History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide User6 |...
Page 376
Downstream Bandwidth Contract ID Assigned to the user. History Added in AOS-W 3.3.0.0. nUser6HTMode Syntax ArubaHTMode Max-Access read-only Status current Description The HT mode of this user, if any. History Added in AOS-W 3.3.0.0. | User6 AOS-W 3.4 MIB | Reference Guide...
Added in AOS-W 3.3.0.0. wlsxUser6SessionTime Syntax Counter32 Max-Access read-only Status current Description Number of users that are connected to the essid whose sessions expired in this time interval. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide User6 |...
User MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Voice MIBs are listed in the file aruba-voice.my. For information about downloading Aruba MIB files, see Downloading MIB Files on page AOS-W 3.4 MIB | Reference Guide Voice |...
This table lists the total number of active calls of the client. wlsxVoiceClientTable This table lists all voice client information. wlsxVoiceAPBssidTotal This object lists the total number of active VoIP. wlsxVoiceAPBssidTable This table lists active VoIP information. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 382
Syntax MacAddress Max-Access read-only Status current Description Voice CDR MAC. History Added in AOS-W 3.2.0.0. voiceCdrName Syntax DisplayString Max-Access read-only Status current Description Voice CDR name. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 383
Unsigned32 Max-Access read-only Status current Description Voice CDR setup time. History Added in AOS-W 3.2.0.0. voiceCdrTeardownTime Syntax Unsigned32 Max-Access read-only Status current Description Voice CDR tear-down number. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 384
Integer32 Max-Access read-only Status current Description Voice CDR R-value. History Added in AOS-W 3.2.0.0. voiceCdrApSwitchDelay Syntax Integer32 Max-Access read-only Status current Description Voice CDR AP switch delay. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 385
Syntax DisplayString Max-Access read- only Status current Description Voice CDR BSSID. History Added in AOS-W 3.2.0.0. voiceCdrEssid Syntax DisplayString Max-Access read-only Status current Description Voice CDR ESSID. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 387
Status current Description Total number of rejected calls. History Added in AOS-W 3.2.0.0. voiceCallCtrsAborted Syntax Unsigned32 Max-Access read-only Status current Description Total number of aborted calls. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 388
Status current Description Total number of not found calls. History Added in AOS-W 3.2.0.0. voiceCallCtrsBusy Syntax Unsigned32 Max-Access read-only Status current Description Total number of busy calls. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 389
Status current Description Total number of unauthorized calls. History Added in AOS-W 3.2.0.0. voiceCallCtrsMisc Syntax Unsigned32 Max-Access read-only Status current Description Total number of miscellaneous calls. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
VoiceClientEntry Max-Access not-accessible Description Entry point. Index { wlanStaPhyAddress } History Added in AOS-W 3.2.0.0. voiceClientIp Syntax IpAddress Max-Access read-only Status current Description Voice client IP address. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 391
Syntax DisplayString Max-Access read-only Status current Description Voice client server name. History Added in AOS-W 3.2.0.0. voiceClientEssid Syntax DisplayString Max-Access read-only Status current Description Voice client ESSID. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 393
DisplayString Max-Access read-only Status current Description Voice access point name. History Added in AOS-W 3.2.0.0. voiceAPBssidGroup Syntax DisplayString Max-Access read-only Status current Description Voice access point group. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 394
Voice access point type. History Added in AOS-W 3.2.0.0. voiceAPBssidFlag Syntax Bits apRemoteAP(0) apPPPOE(1) apWiredApEnabled(2) apEnet1Mode(3) apActiveLoadBalancing(4) apDisconnectExtraCalls(5) apBatteryBoost(6) Max-Access read-only Status current Description Voice access point flag. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 395
Status current Description Voice access point extra call disconnect. History Added in AOS-W 3.2.0.0. voiceAPBssidKickedOff Syntax Counter32 Max-Access read-only Status current Description Voice access point kicked off. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Page 396
Description Voice access point total SCCP calls. History Added in AOS-W 3.2.0.0. voiceAPBssidCallsSIP Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total SIP calls. History Added in AOS-W 3.2.0.0. | Voice AOS-W 3.4 MIB | Reference Guide...
Page 397
Status current Description Voice access point total NOE calls. History Added in AOS-W 3.2.0.0. voiceAPBssidEssid Syntax DisplayString Max-Access read-only Status current Description Voice access point ESSID. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide Voice |...
Chapter 19 WLAN The wireless local area network (WLAN) module provides information about the Wireless Management System (WMS) in the Alcatel-Lucent switch. Figure 20 shows the architecture of the WLAN MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The WLAN MIBs are listed in the file aruba-wlan.my.
The WLAN MIB contains the following tables. Table 106 WLAN MIB Tables Table Description wlsxWlanAPGroupTable This table lists all the access points groups configured in the Alcatel- Lucent switch. wlsxWlanAPTable This table lists all the access points connected to the switch. wlsxWlanRadioTable This table lists all the radios known to the switch.
The wlsxWlanAccessPointInfoGroup contains the following tables: wlsxWlanTotalNumAccessPoints (local), which lists all the APs connected to the switch wlsxWlanTotalNumStationsAssociated (global), which lists all the APs in the Alcatel-Lucent Domain. This table is valid only on the master switchs. The group also contains two scalar objects, which indicate the total number of APs and the total number of clients connected.
Page 405
History Added in AOS-W 2.3. Updated in AOS-W 3.1—changed Max-Access to read-only. wlanAPModel Syntax Object Identifier MAX-ACCES read-only Status current Description Sys OID of the access point. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 406
Number of radios in the access point. History Added in AOS-W 2.3. Updated in AOS-W 3.2.0.0.—description. wlanAPEnet1Mode Syntax ArubaEnet1Mode Max-Access read-only Status current Description ENET1 mode of the access point. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 407
DisplayString Max-Access read-only Status current Description Location of the access point History Added in AOS-W 2.3. wlanAPBuilding Syntax Integer32 Max-Access read-only Status current Description AP building number. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 408
Description AP status. History Added in AOS-W 2.3. wlanAPNumBootstraps Syntax Integer32 Max-Access read-only Status current Description Number of times the AP has boot strapped with the switch. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 409
The building component of the AP’s FQLN. History Added in AOS-W 3.1.0.0. wlanAPFQLNFloor Syntax DisplayString Max-Access read-only Status current Description The floor component of the AP’s FQLN. History Added in AOS-W 3.1.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 410
Latitude of the AP. signed floating-point value. History Added in AOS-W 3.2.0.0. wlanAPAltitude Syntax DisplayString Max-Access read-only Status current Description Altitude of the AP signed floating-point value. History Added in AOS-W 3.2.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx WLAN Radio table provide information on the access points connected in radios that are known to the Alcatel-Lucent switch. This table is indexed by the MAC address of the AP and the type of the radio.
Page 412
Updated in AOS-W OS 3.2—description. wlanAPRadioTransmitPower Syntax Integer32 Max-Access read-only Status current Description The current power level of the access point radio. History Added in AOS-W 2.3. Updated in AOS-W OS 3.2—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 413
The number of clients this radio is monitoring. History Added in AOS-W 2.3. wlanAPRadioNumActiveBSSIDs Syntax Integer32 Max-Access read-only Status current Description The number of AP BSSIDs this radio is monitoring. History Added in AOS-W 2.3. Updated in AOS-W 3.2.0.0.—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 414
Signed floating-point value. Range: -90 to +90. History Added in AOS-W 3.2.0.0. wlanAPRadioHTMode Syntax ArubaHTMode Max-Access read-only Status current Description The HT mode of the radio, if any. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 416
Slot to which the access point is connected. History Added in AOS-W 2.3. wlanAPBssidPort Syntax Unsigned32 Max-Access read-only Status current Description Port to which the access point is connected. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 417
Updated in AOS-W 3.2.0.0.—addition of syntax items (3), (4), update of description. wlanAPBssidChannel Syntax Integer(1..165) Max-Access read-only Status current Description The current operating channel. History Added in AOS-W 2.3. Updated in AOS-W 3.2.0.0.—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 418
Indicates the number of stations associated to this BSSID. History Added in AOS-W 2.3. Updated in AOS-W 3.2.0.0.—description. wlanAPBssidAPMacAddress Syntax MacAddress Max-Access read-only Status current Description Indicates the access point to which this BSSID belongs. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx WLAN ESSID table provide information of the access points to the switch. Table 112 wlsxWlanESSIDTableOBJECT OIDs Object Object ID wlsxWlanESSIDEntry 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1 wlsxWlanESSIDTable 1 wlanESSID 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1 wlsxWlanESSIDEntry 1 AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 420
The ESSID being advertised. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanESSIDNumStations Syntax Unsigned32 Max-Access read-only Status current Description The number of stations connected to this ESSID. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
The objects of the WLAN ESSID VLAN Pool table list all the access points that are connected to this switch Table 113 wlsxWlanESSIDVLANPoolTable OIDs Object Object ID wlsxWlanESSIDVLANPoolEntry 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 wlsxWlanESSIDVLANPoolTable 1 wlanESSIDVLANId 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 wlsxWlanESSIDVLANPoolEntry 1 wlanESSIDVLANPoolStatus 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 wlsxWlanESSIDVLANPoolEntry 2 AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 423
The physical address of the station. History Added in AOS-W 2.3. wlanStaApBssid Syntax MacAddress Max-Access not-accessible Status current Description The access point with which this station was last associated. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 424
Channel on which the station is associated. History Added in AOS-W 2.3. wlanStaVLANId Syntax ArubaVLANValidRange Max-Access read-only Status current Description VLAN in which the station is present. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 425
AID with which the station is associated with this system. History Added in AOS-W 2.3. wlanStaAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
The objects of the wlsx WLAN Access Point Statistics table provide information about access points. Table 115 wlsxWlanAPStatsTable OIDs Object Object ID wlsxWlanAPStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 wlsxWlanAPStatsTable wlanAPCurrentChannel 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 wlsxWlanAPStatsEntry 1 wlanAPNumClients 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 wlsxWlanAPStatsEntry 2 | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 427
1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.23 wlsxWlanAPStatsEntry 23 wlanAPMacAddress 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.24 wlsxWlanAPStatsEntry 24 wlanAPIpAddress 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.25 wlsxWlanAPStatsEntry 25 wlsxWlanAPStatsEntry Syntax WlanAPStatsEntry Max-Access not-accessible Status current Description Access point stats entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 428
Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanAPTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted on this BSSID. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 429
Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanAPRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications received on this BSSID. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 430
Max-Access read-only Status current Description The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 431
Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on the current channel. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 432
Added in AOS-W 2.5. Deprecated in AOS-W 3.2.0.0. wlanAPTxDataPkts Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted on this BSSID. History Added in AOS-W 2.5. Deprecated in AOS-W 3.2.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 433
The number of packets transmitted on this BSSID. History Added in AOS-W 3.2.0.0. wlanAPTxDataBytes64 Syntax Counter64 Max-Access read-only Status current Description The number of bytes transmitted on this BSSID. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 437
The total number of packets observed on this BSSID at 2 Mbps rate. History Added in AOS-W 2.3. wlanAPStatsTotBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 2 Mbps rate. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 438
The total number of bytes observed on this BSSID at 11 Mbps rate. History Added in AOS-W 2.3. wlanAPStatsTotPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 6 Mbps rate. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 439
The total number of packets observed on this BSSID at 18 Mbps rate. History Added in AOS-W 2.3. wlanAPStatsTotBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 18 Mbps rate. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 440
The total number of bytes observed on this BSSID at 36 Mbps rate. History Added in AOS-W 2.3. wlanAPStatsTotPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 48 Mbps rate. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 441
The total number of packets observed on this BSSID at 9 Mbps rate. History Added in AOS-W 2.3. wlanAPStatsTotBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 9 Mbps rate. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 442
Added in AOS-W 3.3.0.0. wlanAPStatsTotBytesAtHT13Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 13.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 443
Added in AOS-W 3.3.0.0. wlanAPStatsTotBytesAtHT15Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 15.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 444
Added in AOS-W 3.3.0.0. wlanAPStatsTotBytesAtHT26Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 26.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 445
Added in AOS-W 3.3.0.0. wlanAPStatsTotBytesAtHT30Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 30.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 446
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT45Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 45.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 447
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 54.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 448
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT60Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 60.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 449
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT78Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 78.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 450
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT90Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 90.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 451
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT108Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 108.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 452
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT120Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 120.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 453
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT130Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 130.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 454
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT150Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 150.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 455
HT 180.0 rate. wlanAPStatsTotBytesAtHT180Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 180.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 456
240.0 rate. wlanAPStatsTotPktsAtHT243Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 243.0 rate. History Added in AOS-W 3.3.0.0. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 457
Added in AOS-W 3.3.0.0. wlanAPStatsTotPktsAtHT300Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observedon this BSSID at the HT 300.0 rate. History Added in AOS-W 3.3.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in AOS-W 2.3. wlanAPStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of broadcast packets observed on this BSSID. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 459
The total number of unicast packets observed on this BSSID. History Added in AOS-W 2.3. wlanAPStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of unicast bytes observed on this BSSID. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
The total number of management packets observed on this BSSID. History Added in AOS-W 2.3. wlanAPStatsTotMgmtBytes Syntax Counter32 Max-Access read-only Status current Description The total number of management bytes observed on this BSSID. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
The objects of the wlsx WLAN AP Pkt Size Stats table provide information on BSSID statistics, which are grouped by packet size. Table 119 wlsxWlanAPPktSizeStatsTable OIDs Object Object ID wlsxWlanAPPktSizeStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 wlsxWlanAPPktSizeStatsTable 1 wlanAPStatsPkts63Bytes 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 wlsxWlanAPPktSizeStatsEntry 1 wlanAPStatsPkts64To127 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 wlsxWlanAPPktSizeStatsEntry 2 AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 462
The total number of packets that were between 64 and 127 bytes long. History Added in AOS-W 2.3. wlanAPStatsPkts128To255 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 128 and 255 bytes long. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 464
The channel the AP is currently using. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanAPChNumStations Syntax Integer32 Max-Access read-only Status current Description The number of stations using this channel. History Added in AOS-W 2.3. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 465
The total fragmented packets observed on this channel. History Added in AOS-W 2.3. wlanAPChTotPhyErrPkts Syntax Counter32 Max-Access read-only Status current Description The total physical error packets observed on this channel. History Added in AOS-W 2.3. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 466
History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanAPChInterferenceIndex Syntax Integer32 Max-Access read-only Status current Description The interference observed on this channel. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 467
Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted on this channel. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 468
Added in AOS-W 2.3. Updated in AOS-W 3.1—description. wlanAPChNumAPs Syntax Integer32 Max-Access read-only Status current Description The number of access points observed on this channel. History Added in AOS-W 2.3. Updated in AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 470
History Added in AOS-W 2.3. Updated AOS-W 3.1—description. wlanStaTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted by this station. History Added in AOS-W 2.3. Updated AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 471
Added in AOS-W 2.3. Updated AOS-W 3.1—description. wlanStaRxBCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station. History Added in AOS-W 2.3. Updated AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 472
Added in AOS-W 2.3. Updated AOS-W 3.1—description. wlanStaCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The total number of control packets transmitted by this station. History Added in AOS-W 2.3. Updated AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 473
Added in AOS-W 2.3. Updated AOS-W 3.1—description. wlanStaRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames received by this station. History Added in AOS-W 2.3. Updated AOS-W 3.1—description. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 474
Updated AOS-W 3.1—description. wlanStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this station. History Added in AOS-W 2.3. Updated AOS-W 3.1—description. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 475
The number of error packets as a percentage of the total packets received by this station. History Added in AOS-W 3.2.0.0. wlanStaTxBCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station. History Added in AOS-W 3.2.0.0. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 477
Syntax wlsxWlanStaRateStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanStaPhyAddress} wlanStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 1 Mbps rate. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 478
The number of octets transmitted by the station at 5 Mbps rate. wlanStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 11 Mbps rate. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 479
The number of octets transmitted by the station at 12 Mbps rate. wlanStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 18 Mbps rate. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 480
The number of octets transmitted by the station at 36 Mbps rate. wlanStaTxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 48 Mbps rate. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 481
The number of octets received by the station at 1 Mbps rate. wlanStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 2 Mbps rate. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 482
The number of octets received by the station at 11 Mbps rate. wlanStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 6 Mbps rate. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 483
The number of octets received by the station at 18 Mbps rate. wlanStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 24 Mbps rate. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 484
The number of octets received by the station at 48 Mbps rate. wlanStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 54 Mbps rate. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 485
The number of packets received by the station at 9 Mbps rate. wlanStaRxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 9 Mbps rate. AOS-W 3.4 MIB | Reference Guide WLAN |...
Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station. wlanStaTxDAMulticastPkts Syntax Counter32 Max-Access read-only Status current Description The number of multicast packets transmitted by this station. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 488
The transmitted control packets from a station. wlanStaTxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted control bytes from a station. wlanStaTxDataPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted data packets from a station. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 489
Counter32 Max-Access read-only Status current Description The number of received control bytes at a station. wlanStaRxDataPkts Syntax Counter32 Max-Access read-only Status current Description The number of received data packets at a station. AOS-W 3.4 MIB | Reference Guide WLAN |...
1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8 wlsxWlanStaPktSizeStatsEntry 8 wlanStaRxPkts128To255 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9 wlsxWlanStaPktSizeStatsEntry 9 wlanStaRxPkts256To511 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 wlsxWlanStaPktSizeStatsEntry 10 wlanStaRxPkts512To1023 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11 wlsxWlanStaPktSizeStatsEntry 11 wlanStaRxPkts1024To1518 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12 wlsxWlanStaPktSizeStatsEntry 12 wlsxWlanStaPktSizeStatsEntry Syntax wlsxWlanStaPktSizeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanStaPhyAddress} | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 491
The number of packets transmitted by the station that were between 256 and 511 bytes long. wlanStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 512 and 1023 bytes long. AOS-W 3.4 MIB | Reference Guide WLAN |...
Page 492
The number of packets received by the station that were between 128 and 255 bytes long. wlanStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 256 and 511 bytes long. | WLAN AOS-W 3.4 MIB | Reference Guide...
Page 493
The number of packets received by the station that were between 512 and 1023 bytes long. wlanStaRxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 1024 and 1518 bytes long. AOS-W 3.4 MIB | Reference Guide WLAN |...
Chapter 20 AMAP Protocol The Alcatel Mapping Adjacency Protocol (AMAP). The AMAP protocol provides a mechanism for discovering the topology of Alcatel-Lucent switches, by enabling each switch to determine which switches are adjacent to it. Figure 21 shows the architecture of the AMAP MIB relative to .1.3.6.1.4.1.6486.800.1 (the alcatelIND1InterswitchProtocolMIB).
Description aipGMAPconfig Group Mobility Advertisement Protocol (GMAP) configuration aipGMAPTable GMAP MAC address list aipAMAPconfig Alcatel Mapping Adjacency Protocol (AMP) configuration aipAMAPportConnectionTable AMAP adjacent switch, local and remote connection index, and Vlan information. aipAMAPhostsTable AMAP adjacent switch IP address information. aipAMAPTraps-0...
Page 497
3 - Update would create two different vlan entries for the same protocol 4 - Update would create two different protocol entries for the same vlan 5 - Target vlan is not mobile 6 - No trap has been sent AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
The objects of the aipGMAP table describe the elements of the GMAP address list. Table 128 aipGMAPTable OIDs Object ObjectOID aipGMAPTableEntry .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.1.10.1 aipGMAPTable 1 aipGMAPMacAddr .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.1.10.1.1 aipGMAPTableEntry 1 aipGMAPProtocol .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.1.10.1.2 aipGMAPTableEntry 2 aipGMAPVlan .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.1.10.1.3 aipGMAPTableEntry 3 aipGMAPSrcSwitch .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.1.10.1.4 aipGMAPTableEntry 4 | AMAP Protocol AOS-W 3.4 MIB | Reference Guide...
Page 499
Description The Vlan identifier for a GMAP entry. aipGMAPSrcSwitch Syntax MacAddress Max-Access read-only Status current Description The MAC address of the switch that provided the information for a GMAP entry. AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
6 aipAMAPhostsTable .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.7 aipAMAPconfig 7 aipAMAPVoiceVlan .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.8 aipAMAPconfig 8 aipAMAPstate Syntax Integer active (1) inactive (2) Max-Access read-write Status current Description Current state of the AMAP agent. Default Value active | AMAP Protocol AOS-W 3.4 MIB | Reference Guide...
Page 501
2 - change of information on existing port 3 - port deleted 4 - no trap has been sent aipAMAPLastTrapPort Syntax Integer (0..65535) Max-Access read-only Status current Description The ifindex number of the port that most recently changed. AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
.1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.6.1.10 aipAMAPportConnectionentry 10 aipAMAPRemDeviceType .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.6.1.11 aipAMAPportConnectionentry 11 aipAMAPportConnectionentry Syntax AipAMAPportConnectionEntry Max-Access not-accessible Status current Description AMAP adjacent switch, local and remote connection index, and Vlan information. Index { aipAMAPLocalConnectionIndex, aipAMAPRemMac, aipAMAPRemConnectionIndex } | AMAP Protocol AOS-W 3.4 MIB | Reference Guide...
Page 503
Description The remote Vlan to which the connection is connected in the adjacent switch. aipAMAPRemHostname Syntax Octet String (Size(32)) Max-Access read-only Status current Description The remote hostname for the adjacent switch. AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
Page 504
The remote slot of the port to which the connection is connected. aipAMAPRemPort Syntax Integer (0..65535) Max-Access read-only Status current Description The remote interface port of the port to which the connection is connected. | AMAP Protocol AOS-W 3.4 MIB | Reference Guide...
The type of device seen on the port. aipAMAPhostsTable The aipAMAPhosts table contains the following objects: Table 131 aipAMAPhostsTable OIDs Object Object ID aipAMAPHostentry .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.7.1 aipAMAPhostsTable 1 aipAMAPHostMac .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.7.1.1 aipAMAPHostentry 1 aipAMAPIpAddr .1.3.6.1.4.1.6486.800.1.2.1.9.1.1.2.7.1.2 aipAMAPHostentry 2 AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
The following AMAP traps are defined in this MIB: Table 132 aipAMAPTraps OIDs Object Object ID aipAMAPStatusTrap .1.3.6.1.4.1.6486.800.1.3.2.1.0.1 aipAMAPTraps 0 1 aipAMAPStatusTrap Objects { aipAMAPLastTrapReason, aipAMAPLastTrapPort } Status current Description An AMAP port status change and reason. | AMAP Protocol AOS-W 3.4 MIB | Reference Guide...
The following GMAP traps are defined in this MIB: Table 133 aipGMAPTraps OIDs Object Object ID aipGMAPConflictTrap .1.3.6.1.4.1.6486.800.1.3.2.2.0.1 aipGMAPTraps 0 1 aipGMAPConflictTrap Objects { aipGMAPLastTrapReason, aipGMAPLastTrapPort, aipGMAPLastTrapMac, aipGMAPLastTrapProtocol, aipGMAPLastTrapVlan } Status current Description A GMAP update conflict. AOS-W 3.4 MIB | Reference Guide AMAP Protocol |...
This section provides lists of the SNMP MIB OIDs that are related to AOS-W. The first table (Table 134) defines the sysObjectIds for Alcatel-Lucent products. The second table below (Table 135) defines the entrprise OIDs from the Aruba Networks private MIBs, which are used in Alcatel-Lucent wireless switch products.
Need help?
Do you have a question about the AOS-W 3.4 MIB and is the answer not in the manual?
Questions and answers