Mail; Adding A Mail Notification Destination; Modifying A Mail Notification Destination - Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual

Chapter 3 Web Administrator Site Configuration

Mail

Adding a mail notification destination

Modifying a mail notification destination

48
3 Select Remove.
4 In the appearing dialog, click Yes to confirm the deletion, or click
No, if you changed your mind.
The routing rule will disappear from the list.
e-mail notification destinations are specified only through SMTP
addresses.
1 In the Web Administrator, select Configuration|Notification
Destinations|Mail, and then select Add.
The Mail Destination Properties dialog appears.
2 Enter a valid SMTP address in the SMTP Address field.
3 In the Notification Settings section, choose a notification
profile, in the Notification Profile selection box.
These notification profiles are originally defined in the
Notification Profiles node of the Web Administrator. Refer to
Notification profiles on page 52.
4 Check the Make this destination available to all users
for forward operation box.
5 Check the boxes beside the events that must generate a mail
destination notification: Notify on Outbound Success, Notify
on Outbound Failure, Notify on Inbound Success and/or
Notify on Inbound Failure.
6 Click OK.
1 In the Web Administrator, select Configuration|Notification
Destinations|Mail.
2 In the right panel of the Web Administrator, select the checkbox of
the display name for which you would like to view properties, and
then click Properties.
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01